A quality, standard beer faucet made from 100% stainless steel. 

Requires a shank and handle, sold separately.

Chrome plated brass standard dispensing faucet with brass lever.

Requires a shank and handle, sold separately.

For use on the Red handle "Super Automatica Capper" with Tirage Bells. The standard bell supplied with the Super Automatica Capper is 26mm. This larger 31mm bell is compatible with slightly larger caps and bottle tops.

IMPORTANT: This bell is NOT compatible with the "Green Standard Bench Capper"  OR "Lever Bench Capper" - due to different thread size.

This push in gauge is ideal to read pressures during pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need.

The barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the push in fittings such as the Duotight push in fittings in the 8mm size.

Specifications:
- 0-40psi / 0-250kPa / 0-2.5 Bar (kg/cm^2)
- Rubber Coated
- 8mm Push in Barb

From: Kegland

The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

A square design beer tap tower which fit all kinds of interiors in modern bars or at home. Available in triple and four tap models.

- Made of high quality stainless steel for durability and reliability
- 100% stainless steel contact with beer
- SS polished finish unless specified

These robust stainless steel fonts will last forever and will not corrode like many other chrome plated steel fonts.

The brushed stainless finish looks great and also suits the brushed finished on many kegrators including the Series 4 Kegerator that we sell.

These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.

These fonts are perfect for air cooling and can be used with a Font Fan Kit 

Specifications:
- 320mm Tall (without taps)
- 78mm Diameter
- Base Collar Diameter 111mm
- Internal Foam Insulation

Note: does not include taps

This unit has been designed to fit our standard Quadruple Tap Kegerator Tower or any other 115mm diameter font. It does not fit 1-3 tap kegerator towers.

Keep your beer icy-cold with this insulated tower/font cover right out of the first drop. Most kegerators that we sell include a font fan that blows cold fridge air up the font. With that said heat loss from the stainless font surface causes the font temperature to rise meaning that a small amount of beer contributes to the "first pour foam effect".