Keg Parts
-
Keg lid feet for cornelius keg x2
Keg lid feet for cornelius keg x2
Dimensions 5.5mm ID
Out of Stock -
Lid Closure Feet Cover (AMCYL Keg)
Replacement keg closure foot. Sold singly. Replacement foot to go on AMCYL keg lid to provide pressure for closing the keg lid.
Dimensions = 6 mm ID
-
Cornelius Type Keg Lid
Brand new replacement lid for corny kegs complete with new seal and pull-ring pressure relief valve.
-
Carbonation Keg Lid & 0.5 Micron Diffusion Stone
Carbonation Keg Lid & 0.5 Micron Diffusion Stone.
The fastest way to carbonate your beer in a corny keg. Sanitize the stone (boil for 2-3 minutes) and replace your regular lid with this lid, then attach your CO2. Purge your keg a few times by opening the pressure valve. Set to 10 PSI (or whatever your target pressure is), come back in 24h and check carbonation level, it should be almost there. No risk of over carbonating your beer this way.Out of Stock -
Corny Keg Gas dip tube
A replacement dip tube (gas in) for cornelius-style kegs. Includes o-ring.
Length: approx. 40mm. If you just need the dip-tube o-ring that is available as a separate item. -
Silicone O-ring for Corny Keg Lids
Replacement silicone o-ring seal for corny keg lids. May be black or white.
Silicone o-rings are often better for getting a good seal than solid plastic ones, due to be less rigid.These are all one standard size of 100mm OD x 90mm ID.
-
Ball Lock Poppet with Spring
Poppet to fit your ball lock keg post. Includes spring and poppet washer. One of the many cornelius / corny keg replacement parts and accessories that we stock. -
Corny Keg Dip Tube O-Ring
Replacement o-ring for keg dip tubes.
One of the many cornelius spare parts and accessories that we stock to help people building or maintaining any kegerator or keezer. -
Corny Keg Post O-Ring
Corny Keg Post O-Ring
This goes on the outside of the post at the top. O-Rings should be regularly checked to prevent leaking of CO2 or beer.
This one is made of silicon which performs better at low temperatures than rubber.Daimensions - 8mm ID 13mm OD.
-
Keg lid pressure relief valve (red) - 35PSI
Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids. This model is the red - 35 PSI version, also available in 65 and 100 PSI versions.