Other Homecrafts

  1. Nukatap Stout Spout - Stainless & Black Nukatap Stout Spout - Stainless & Black
    $14.95

    Nukatap Stout Spout - Stainless & Black

    The Stout Spout extension can be used on any of the Nukatap beer taps. It has a removable creamer/aerator disc inside that is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.

  2. EPDM Washer Seal - 5/8 for Keg Coupler and Tap Shank
    $0.50

    EPDM Washer Seal - 5/8 for Keg Coupler and Tap Shank

    This is a EPDM 5/8 Washer which is suitable for Keg Couplers and Tap Shanks

    Specifications:
    15mm ID x 21.5mm OD x 3mm

     

  3. Beer Tap - Keg Picnic Tap - Duotight (6mm) Beer Tap - Keg Picnic Tap - Duotight (6mm)
    $6.95

    Beer Tap - Keg Picnic Tap - Duotight (6mm)

    Bronco / Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you.

    Now even better with the addition of duotights. No more hose clamps or stretching hose over barbs! It also makes it easy to disconnect and balance hosing if required.

    Looking for the barbed picnic tap? You'll find it here.

    From: Kegland

    Out of Stock
  4. Beer Gun - Stout (nitro)
    $69.95

    Beer Gun - Stout (nitro)

    Convenient hand-held beer dispensing gun for pouring stouts or nitro beers.
  5. FermZilla All Rounder - 30L Jacket FermZilla All Rounder - 30L Jacket
    $49.95

    FermZilla All Rounder - 30L Jacket

    This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

    This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

  6. Inline Oxygenation Kit Inline Oxygenation Kit
    $169.95

    Inline Oxygenation Kit

    The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.

    • Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
    • 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
    • (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
    • 3/8" barbed oxygen inlet with ball valve to control flow
    • All 304 stainless construction
  7. Beer Tower - Single Tap - C173
    $149.95

    Beer Tower - Single Tap - C173

    Single Tap Beer Tower for dispensing your beer from kegs. This is a high quality, Krome Dispense brand beer tower made from stainless steel and comes complete with taps. 

    Includes: 

    • 5 feet beer tubing
    • 1 chrome plated tap
    • 1 black tap handle
    • 1 stainless column (3 inch) mounting hardware and gasket
  8. NUKATAP duotight (Black) Short Shank - (duotight compatible)
    $25.00

    NUKATAP duotight (Black) Short Shank - (duotight compatible)

    These black stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the Black NUKATAP SS Stealth bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar.

    Item Includes:

    - Blank Stainless Steel Shank with a 6.5mm duotight compatible barb.
    - Ring collar
    - Nut
    - Right angle font collar to suit font
    - Shaped internal collar to suit font

    Out of Stock
  9. Wadded Plastic Flagon Caps (pack of 10)
    $15.85

    Wadded Plastic Flagon Caps (pack of 10)

    Wadded Plastic Flagon Caps (pack of 10) 34mm
    These fit the older style 2L glass flaggon bottles.

    Out of Stock
  10. Ss CIP Spray Ball Tri-Clamp Attachment 3"
    $80.00

    Ss CIP Spray Ball Tri-Clamp Attachment 3"

    CIP Spray Ball Tri-Clamp Attachment

    - Made from 304 Stainless Steel
    - 3" tri-clamp cap with 1/2" MPT
    - 2 bar / 29 psi recommended 
    - Use on any 3" tri-clamp fitting