Portable size
Can pressure carbonate (using the ball lock cap)
No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg 
Perfect for smaller experimental batches
Handles for easy transportation
Stainless steel body

This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.

Allowing for a 90 degree connection between the barb on the yellow liquid plastic carbonation cap and the 6.3mm OD dip tube provided in the kit.

Replacement lid for PCO38 PET kegs.

Please note: All PCO38 kegs do not have a washer/seal/o-ring. It uses a wedge compression sealing much like a Coca-Cola Bottle does.

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

This bundle combines the four items needed for a standard ball lock set up, including a Duotight 8mm Flow Control Ball Lock Disconnect for fine flow rate control.

Includes:

• Nukatap Mini
• NukaTap Mini Self Closing Tap Spring
• NukaTap Mini - Duotight Adaptor - 8mm
• Keg Connector - Duotight Flow Control - 8mm Liquid

Most conventional beer taps are designed with a 10mm diameter nozzle/spout so you can pour pint in just over 10sec.  This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems, a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body. 

Low Profile Ball Lock Tapping Head for Standard Mini Kegs. The ideal solution for a compact kegging setup and for fitting mini kegs in an esky.

This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube with filter.

The new lightweight and reusable plastic kegs are brought to you by Oxebar and KegLand. Store your homebrew in a more convenient size, take it away camping or to a bbq. The new shorter profile 4L under 330mm will fit in most chilly bins or esky coolers. You can also dispense with it lying on its side.

This 4L keg is light weight, compact and has extreme oxygen barrier properties. This extremely low gas transmission means your beverage will stay much fresher for longer. Even if you do consume the beverage in a short time, that short time will have much less oxygen transmission compared to other PET kegs on the market. Suitable for carbonated and non-carbonated beverages.