CO2 Equipment

  1. CO2 Cylinder - 2.3 kg (3.4L)
    $285.00

    CO2 Cylinder - 2.3 kg (3.4L)

    A high quality Luxfer C02 Cylinder to use with your Kegerator.
  2. 1/4" stainless BSP hex plug 1/4
    $4.00

    1/4" stainless BSP hex plug

    1/4" stainless hex plug
    Out of Stock
  3. Premium Plus Micromatic Regulator Dual Outlet Premium Plus Micromatic Regulator Dual Outlet
    $144.00

    Premium Plus Micromatic Regulator Dual Outlet

    Premium Plus Micromatic, dual guage CO2 Regulator for your kegging system. This high quality regulator will allow constant pressure supply at high output flow rates. Now comes with adjustment knob to alter the pressure, or use the allen key provided. The two stainless outlets come with shut off valves, and allows you to run two or more kegs at the same pressure.

  4. Single CO2 Regulator - MK4 Single CO2 Regulator - MK4
    $75.00

    Single CO2 Regulator - MK4

    The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.
    Comes with 8mm push in fitting.

  5. 1/4" BSP Stainless Hex Nipple
    $5.00

    1/4" BSP Stainless Hex Nipple

    1/4" BSP Stainless Hex Nipple
  6. 1/4 Inch NPT x MFL Thread Ball Valve with Check Valve 1/4 Inch NPT x MFL Thread Ball Valve with Check Valve
    $9.95

    1/4 Inch NPT x MFL Thread Ball Valve with Check Valve

    These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another

    The manifolds we sell all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing the 1/4 inch plug from the end of the manifold and inserting one of these 1/4 inch ball valves (see image to the left)

    Please note, we recommend using teflon plumbers tape when screwing these into any manifold.

    Out of Stock
  7. Add-On CO2 Regulator Adapter
    $25.00

    Add-On CO2 Regulator Adapter

    Ideal for dispensing two draft beers that require different CO2 pressures. Modular design makes expansion easy. Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the other side of this adapter. The two threads are ¼” NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators.
  8. Regulator washer
    $2.00

    Regulator washer

    Standard nylon washer for ensuring no leaks attaching your regulator to your CO2 bottle.

     

    Outer diameter = 18mm x internal diameter = 11.5mm x 3mm thickness

    Out of Stock
  9. Micromatic Premium Primary CO2 (heavy duty) regulator
    $149.95

    Micromatic Premium Primary CO2 (heavy duty) regulator

    Premium Primary Micromatic, dual guage CO2 Regulator for your kegging system. This model is similar to the Premium Plus but more robust, heavier, and has a different adjustment knob.

    Out of Stock
  10. 6mm ID Ledavin PVC tube / hose
    $5.75

    6mm ID Ledavin PVC tube / hose

    This is a bulk product - one unit equals 1 meter.

    Clear 6mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

    We recommend using the 4mm ID version of this where you want the line as short as possible (kegerators, fridge mounted taps etc). This makes a great gas line or when you need to bridge longer distances from keg to tap.

    Outer diameter = 10mm