1. Camlock – Type D female x 1/2 inch female
    $13.00

    Camlock – Type D female x 1/2 inch female

    Camlock – Type D female x 1/2 inch female

    Stainless Steel - 150psi/11Bar Operating Pressure
  2. 12.7mm Stainless Steel Compression Fitting 1/2” BSP 12.7mm Stainless Steel Compression Fitting 1/2” BSP
    $10.00

    12.7mm Stainless Steel Compression Fitting 1/2” BSP

    A 12.7mm compression fitting with 1/2" BSP thread.

    These compression fittings are commonly used with immersion chillers to quickly disconnect the liquid hosing for storage and ease of cleaning.

  3. Camlock – Type A male x 1/2 inch female Camlock – Type A male x 1/2 inch female
    $10.00

    Camlock – Type A male x 1/2 inch female

    Camlock - Male to 1/2" Female (A Type).

    Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

    Made from: Stainless Steel 316
  4. Quick Disconnect - Male to 8mm Barb Quick Disconnect - Male to 8mm Barb
    $9.00

    Quick Disconnect - Male to 8mm Barb

    Stainless Steel Quick Disconnect - Male to 8mm barb.
  5. Camlock – Type C female x 1/2 inch barb Camlock – Type C female x 1/2 inch barb
    $13.00

    Camlock – Type C female x 1/2 inch barb

    Camlock - Female to 1/2" Barb (C Type).

    Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

    Made from: Stainless Steel 316
  6. Male quick disconnect 13mm barb
    $9.90

    Male quick disconnect 13mm barb

    Male quick disconnect 13mm barb
  7. 14mm Stainless Compression Fitting to 1/2 inch BSP Male 14mm Stainless Compression Fitting to 1/2 inch BSP Male
    $9.00

    14mm Stainless Compression Fitting to 1/2 inch BSP Male

    14mm Stainless Compression Fitting to 1/2 inch BSP Male
  8. Tri-Clamp Gasket - 1.5"
    $3.50

    Tri-Clamp Gasket - 1.5"

    Tri-Clamp Gasket - 1.5" - fits the SS Chronical fermentor lid

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  9. Tri-Clamp Gasket - 2"
    $3.50

    Tri-Clamp Gasket - 2"

    Tri-Clamp Gasket - 2 inch

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  10. Tri-clamp Cap with 1/2" Female Thread Tri-clamp Cap with 1/2
    $24.20

    Tri-clamp Cap with 1/2" Female Thread

    Tri-clamp Cap with 1/2" Female Thread

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.