Caps and Cappers

  1. Mangrove Jacks Crown Seals x 150
    $7.40

    Mangrove Jacks Crown Seals x 150

    Mangrove Jacks Crown Seals x 150. Designed to fit standard crown seal bottle types and for use with any standard bottle capper.

    As with everything that comes into contact with your beer, we recommend sanitising bottle caps prior to use. Caps be sanitised by boiling or by soaking in sanitiser.
  2. Hand Held Wooden Capper Hand Held Wooden Capper
    $11.20

    Hand Held Wooden Capper

    Hand Held Wooden Capper

    This is the cheapest way to cap your beer bottles with crown caps.
    You'll need a hammer and a steady hand.
    Be careful, the bottle can shatter and cut your hand if you hit it too hard or it's an old scratched bottle.
  3. Red Twin Lever Bottle Capper Red Twin Lever Bottle Capper
    $39.40

    Red Twin Lever Bottle Capper

    Use with crown bottle caps to cap your bottles of homemade beer or cider. Can be used with re-usable standard crown beer bottles. No mounting needed. High quality product made in Italy.
  4. Bench Capper Super Automatica Bench Capper Super Automatica
    $81.50

    Bench Capper Super Automatica

    Bench Capper Super Automatica

    Bench cappers are the fastest and easiest to use bottle cappers for crown caps. Ideally you screw it down onto your work bench for more stability.
    Out of Stock
  5. Super Automatica Tirage Bell - 29/31mm (large) Super Automatica Tirage Bell - 29/31mm (large)
    $20.50

    Super Automatica Tirage Bell - 29/31mm (large)

    For use on the Red handle "Super Automatica Capper" with Tirage Bells. The standard bell supplied with the Super Automatica Capper is 26mm. This larger 31mm bell is compatible with slightly larger caps and bottle tops.

    IMPORTANT: This bell is NOT compatible with the "Green Standard Bench Capper"  OR "Lever Bench Capper" - due to different thread size.

  6. Standard Bench Capper Standard Bench Capper
    $49.95

    Standard Bench Capper

    Our standard bench capper provides an easy way to cap your beer bottles.

    It is made from steel and with rubber grip pad so your bottles don't slip off the platform

    This bottle capper can be used on different size bottles as the hight of the bell can be adjusted, and it can be bolted to sturdy surface.

    Features:
    - Easy to use and adjust to required heights depending on bottle size
    - Comes with a standard bell which has a built in magnet to hold the bottle cap
    - Simply place bottle caps in the bell then place the bottle underneath and pull the handle down

    The capper is shipped flat-packed and needs assembling before use.

    Out of Stock
  7. Tirage Bell (29/31mm) For Standard bench capper.
    $17.70

    Tirage Bell (29/31mm) For Standard bench capper.

    For use on Standard (green handle) bench cappers with Tirage Bells. The standard bell supplied with the Standard Capper is 26mm. This larger 29/31mm bell is compatible with slightly larger caps and bottle tops.

    IMPORTANT: This bell is NOT compatible with the "Super Automatica (red handle) Lever Bench Capper, or the "Twin Lever Emily Bottle Capper" due to different thread size.

    Out of Stock
  8. Replacement Tirage Bell for Super Automatica (26mm)
    $18.50

    Replacement Tirage Bell for Super Automatica (26mm)

    Replacement Bell for Super Automatica Capper