Connections and Valves

  1. Tri-clamp Cap with 1/2" Female Thread Tri-clamp Cap with 1/2
    $24.20

    Tri-clamp Cap with 1/2" Female Thread

    Tri-clamp Cap with 1/2" Female Thread

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  2. 1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting
    $12.00

    1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting

    1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting. Made from Stainless Steel.

    BSP stands for British Standard Pipe Thread and describes the type of threading.
  3. Tri-clamp gasket 3"
    $4.00

    Tri-clamp gasket 3"

    Replacement silicone 3 inch Tri-Clamp Gasket, suitable for all standard tri-clamp fittings.

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  4. Ball Valve - Three-Piece 1/2"
    $35.00

    Ball Valve - Three-Piece 1/2"

    A 3-piece, full bore stainless steel ball valve complete with locking handle. It has female BSP threads at each end. Being 3-piece it is also easy to disassemble and clean.
  5. 1.5” Tri-Clamp cap with 3/4” BSP female
    $17.80

    1.5” Tri-Clamp cap with 3/4” BSP female

    1.5” Tri-Clamp cap with 3/4” BSP female

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  6. Camlock – Type E male x 1/2 inch barb Camlock – Type E male x 1/2 inch barb
    $10.00

    Camlock – Type E male x 1/2 inch barb

    Camlock – Type E male x 1/2 inch barb

    Stainless Steel - 150psi/11Bar Operating Pressure
  7. 1.5” Tri-Clamp cap with 1/2” BSP male
    $28.40

    1.5” Tri-Clamp cap with 1/2” BSP male

    1.5” Tri-Clamp cap with 1/2” BSP male.

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  8. Camlock – Type B female x  1/2 inch male Camlock – Type B female x  1/2 inch male
    $13.00

    Camlock – Type B female x 1/2 inch male

    Camlock – Type B female x 1/2 inch male

    Stainless Steel - 150psi/11Bar Operating Pressure
  9. Quick Disconnect - Female to 1/2" Male BSP Quick Disconnect - Female to 1/2
    $13.00

    Quick Disconnect - Female to 1/2" Male BSP

    Stainless Steel Female Quick Disconnect with 1/2" Male BSP Fitting. Allows you to easily change lines when moving liquids around. Holds pressure up to 60psi.

    Includes a food grade O-ring.

  10. Camlock – Type F male x 1/2 inch male
    $10.00

    Camlock – Type F male x 1/2 inch male

    Camlock – Type F male x 1/2 inch male

    Stainless Steel - 150psi/11Bar Operating Pressure