1. 2 Output / 2 Way Gas Line Manifold Splitter with Check Valves 2 Output / 2 Way Gas Line Manifold Splitter with Check Valves
    $44.00

    2 Output / 2 Way Gas Line Manifold Splitter with Check Valves

    2 Output / 2 Way Gas Line Manifold Splitter with Check Valves. These gas manifolds are rated to 100psi and include 2 gas line outputs and 2 x 1/4inch ball vales.
  2. Add-On CO2 Regulator Adapter
    $39.00

    Add-On CO2 Regulator Adapter

    Ideal for dispensing two draft beers that require different CO2 pressures. Modular design makes expansion easy. Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the other side of this adapter. The two threads are ¼” NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators.
  3. Premium Plus Micromatic Regulator Dual Outlet Premium Plus Micromatic Regulator Dual Outlet
    $144.00

    Premium Plus Micromatic Regulator Dual Outlet

    A Premium Plus Micromatic Regulator to attach to a large gas cylinder, with two shut-off valves and barbed outs for two gas lines.

    Pressure adjustment is done using an Allen key (supplied) to help ensure your pressure setting is constant and doesn't change every time you knock it. Alternatively you can install the supplied dial so that you can easily adjust the pressure at any time.

  4. Single CO2 Regulator - MK4
    $75.00

    Single CO2 Regulator - MK4

    The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.

  5. Nylon washer for CO2 regulator
    $2.50

    Nylon washer for CO2 regulator

    Standard nylon washer for ensuring no leaks attaching your regulator to your CO2 bottle.

     

    Outer diameter = 18mm x internal diameter = 11.5mm x 3mm thickness

  6. 6mm ID Ledavin PVC tube / hose
    $5.75

    6mm ID Ledavin PVC tube / hose

    This is a bulk product - one unit equals 1 meter.

    Clear 6mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

    We recommend using the 4mm ID version of this where you want the line as short as possible (kegerators, fridge mounted taps etc). This makes a great gas line or when you need to bridge longer distances from keg to tap.

    Outer diameter = 10mm

  7. 1/4" stainless BSP hex plug 1/4
    $4.00

    1/4" stainless BSP hex plug

    1/4" stainless hex plug
  8. Push In Pressure Gauge - 8mm
    $13.00

    Push In Pressure Gauge - 8mm

    This push in gauge is ideal to read pressures during pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need.

    The barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the push in fittings such as the Duotight push in fittings in the 8mm size.

    Specifications:
    - 0-40psi / 0-250kPa / 0-2.5 Bar (kg/cm^2)
    - Rubber Coated
    - 8mm Push in Barb

    From: Kegland

  9. 3 Way Gas Line Manifold Splitter With Check Valves
    $45.00

    3 Way Gas Line Manifold Splitter With Check Valves

    A three-way distributor for splitting your CO2 gas line into three outputs, each with its own shut-off valve. All valves have an inbuilt check valve mechanism to prevent back flow. Comes with a 60PSI pressure relief value.

    Made from brass and stainless steel 304.

  10. CO2 Cylinder Holder (Single) CO2 Cylinder Holder (Single)
    $10.00

    CO2 Cylinder Holder (Single)

    A CO2 Gas Cylinder Holder for securing one cylinder.

    Simply mount onto the wall or similar (screws not included) and use the chain to wrap around the cylinder.