1. Grainfather Conical Fermenter Dual Valve O-ring D (OD*13mm) Grainfather Conical Fermenter Dual Valve O-ring D (OD*13mm)
    $0.30

    Grainfather Conical Fermenter Dual Valve O-ring D (OD*13mm)

    Grainfather Conical Fermenter Dual Valve O-ring D (OD*13mm)
  2. 19L Ball Lock Keg – double handle & rubber foot
    $169.00

    19L Ball Lock Keg – double handle & rubber foot

    19L Ball Lock Keg – double handle & rubber foot - new.

    This may be branded as Kegland, Mangrove Jack's or Williams Warn depending on availability.
  3. Grainfather Conical Fermenter Tri Clamp - 2 Inch Grainfather Conical Fermenter Tri Clamp - 2 Inch
    $23.15

    Grainfather Conical Fermenter Tri Clamp - 2 Inch

    A replacement Tri Clamp (2 Inch) for the Grainfather Conical Fermenter
  4. Glass Flip Top Bottle 750ml Amber - Case of 12
    $26.00

    Glass Flip Top Bottle 750ml Amber - Case of 12

    Glass Flip Top Bottle 750ml Amber - Case of 12. Made with brown glass to make sure that sunlight can't deteriorate the contents.

    Replacement seals for the flip-tops are available.
  5. Grainfather Glycol Chiller with 3L glycol and insulation jacket
    $1,395.00

    Grainfather Glycol Chiller with 3L glycol and insulation jacket

    Control your fermentation temperature accurately, every time!

    With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to the Grainfather Conical Fermenter to ensure superior fermenting results.

    With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 4ºC.

  6. Bottle Brush, Fantail Tip Bottle Brush, Fantail Tip
    $6.00

    Bottle Brush, Fantail Tip

    Bottle Brush, Fantail Small Tip. Just over 45cms in length, with a solid wire construction. The end piece is small enough to fit inside most standard bottle necks. Has a hooked handle allowing you to hang it up when not in use.
  7. Grainfather Condensation Jacket
    $50.00

    Grainfather Condensation Jacket

    Reduce condensation on the Conical Fermenter caused by low fermentation temperatures. Made from high quality 5mm thick SBR foam.
    Contains two separate removable pieces for the fermenter body and the conical cone.

  8. Grainfather Conical Fermenter Pressure Transfer
    $99.00

    Grainfather Conical Fermenter Pressure Transfer

    Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer.
  9. Grainfather Conical Cooling Pump Kit
    $99.90

    Grainfather Conical Cooling Pump Kit

    Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulate and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. The Cooling Pump allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.

    Contains:
    - Pump
    - Couplers to attach to the fermenter
    - Two cooling hoses with insulation

  10. Grainfather Conical Fermenter Digital Temperature Controller

    Regular Price: $90.00

    Special Price $85.00

    Grainfather Conical Fermenter Digital Temperature Controller

    The Grainfather digital Temperature Controller replaces the temperature display. With this you can control the heating and the cooling (if you have the Grainfather Glycol Chiller) of your fermenter by dialling in a temperature or even setting a temperature schedule (can set up to 5 stages). This snaps on easily via magnets and pogo pins with no extra cords or clutter. WHAT’S INCLUDED?
    Temperature Controller

    SPECIFICATIONS:
    • Control the heating element and Glycol Chiller (available separately)
    • Choose between imperial and metric (C° & F°)
    • Total of 4 fermentation profiles with up to 5 steps each (2 are pre-set for a lager and a ale, 2 are custom)
    • Hysteresis is customisable and able to be set at 0.1 intervals between a range of 0.1°C – 1.9°C & 0.2°F - 2.9°F (the default setting is 0.5°C)

    NOTE:
    · Profile steps are set to ‘auto proceed’ by default, when setting up your own profile with steps the choice of ‘manual proceed’ (i.e. having to push a button to move to the next step) will only be available to select when the user changes the setting ‘auto proceed’ to off. Each step can then be selected as either auto proceed or manual proceed, depending on the users choice.