1. Premium Plus Micromatic Regulator
    $139.50

    Premium Plus Micromatic Regulator

    A Premium Plus Micromatic Regulator to attach to a large gas cylinder, with a shut-off valve and barbed out for your gas line. Pressure adjustment is done using an Allen key (supplied) to help ensure your pressure setting is constant and doesn't change every time you knock it.
  2. 4 Way Gas Line Manifold Splitter With Check Valves 4 Way Gas Line Manifold Splitter With Check Valves
    $60.00

    4 Way Gas Line Manifold Splitter With Check Valves

    These gas manifolds are rated to 100psi and include 4 gas line outputs and 4 x 1/4inch ball vales. This unit can be turned into a 5 way manifold by adding a 1/4 inch ball valve on the 4 way manifold Multiple gas manifolds can be connected together using our 1/4 inch hex nipple. This will enable you to make your manifold as large as you like. You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly if you want to be able to easily disconnect/reconnect a gas line. Features: - Made complete from aluminium, brass and stainless so they are durable. - Includes screw holes at the top for easy mounting to your gas board. - Each ball valve has a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another
  3. 6mm ID Ledavin PVC tube / hose
    $5.75

    6mm ID Ledavin PVC tube / hose

    This is a bulk product - one unit equals 1 meter.

    Clear 6mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

    We recommend using the 4mm ID version of this where you want the line as short as possible (kegerators, fridge mounted taps etc). This makes a great gas line or when you need to bridge longer distances from keg to tap.

    Outer diameter = 10mm

  4. CO2 Cylinder - 2.3 kg (3.4L)
    $250.00

    CO2 Cylinder - 2.3 kg (3.4L)

    A high quality Luxfer C02 Cylinder to use with your Kegerator.
  5. Premium Plus Micromatic Regulator Dual Outlet Premium Plus Micromatic Regulator Dual Outlet
    $144.00

    Premium Plus Micromatic Regulator Dual Outlet

    A Premium Plus Micromatic Regulator to attach to a large gas cylinder, with two shut-off valves and barbed outs for two gas lines.

    Pressure adjustment is done using an Allen key (supplied) to help ensure your pressure setting is constant and doesn't change every time you knock it. Alternatively you can install the supplied dial so that you can easily adjust the pressure at any time.

  6. 2 Output / 2 Way Gas Line Manifold Splitter with Check Valves 2 Output / 2 Way Gas Line Manifold Splitter with Check Valves
    $44.00

    2 Output / 2 Way Gas Line Manifold Splitter with Check Valves

    2 Output / 2 Way Gas Line Manifold Splitter with Check Valves. These gas manifolds are rated to 100psi and include 2 gas line outputs and 2 x 1/4inch ball vales.
  7. CO2 Cartridge (16 gram) CO2 Cartridge (16 gram)
    $5.00

    CO2 Cartridge (16 gram)

    Replacement threaded CO2 cartridge for kegging charger kits and other similar equipment. These premium cartridges are filled with food grade CO2.
    Suitable for pushing liquid out of your vessel, doesn't contain enough gas for force carbonation.

    Size: 16g
  8. Duotight Inline Regulator Duotight Inline Regulator
    $24.95

    Duotight Inline Regulator

    The Duotight Inline Regulator - these compact inline regulators have been designed to suit 8mm (5/16") tubing.

    Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard. Suitable for mains water pressure, also suitable for liquid or gas.

    • Made from Acetal/POM, EPDM o-rings and stainless teeth
    • Suits 8mm (5/16) OD tubing
    • Includes integrated 0-60psi Pressure Gauge

    For higher pressures such as mains water supply we recommend the 4mm ID Tubing, or 5mm ID if you do not need as high pressures and you would prefer higher flow rate.

    This compact solution for adjusting water and gas pressure can be useful in many different applications. It can be used for compressed air, CO2, nitrogen, mains water supply and many other things.

    The design utilises the reliability of the Kegland patented Duotight o-ring system to make sure you can fit hoses to this unit quickly and with leak free connections.

    These gauges are accurate to about 10% of the range of the pressure gauge. So if you use the lowest range possible it will ensure the best possible accuracy.

    IMPORTANT WARNING: Do not exceed gauge pressure. If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge. (ie if you are using the 0-60psi gauge. Do not set pressure above 60psi or damage to the gauge may occur.)

    Made From: food grade engineering plastic, stainless steel and quality made EPDM seals

  9. Hex Adapter - 5/8" to 1/2" BSP
    $9.00

    Hex Adapter - 5/8" to 1/2" BSP

    Hex Adapter to convert 5/8" thread of a keg coupler to 1/2" BSP.

    From: Krome Dispense
    Material: Brass
    Finish: Chrome Plated Brass
    Size: 1/2" x 5/8"

    One of the many kegging accessories that we stock.
  10. Duotight - 8mm Push-Fit Check Valve
    $5.00

    Duotight - 8mm Push-Fit Check Valve

    Duotight 8mm (5/16) one way check valve/non-return valve.

    This very handy fitting could save your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1 psi. It is suitable for clean liquids such as water or for gas. The spring and internal components are made with stainless steel and quality EPDM seals.

    No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

    These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. 

    Fits 8mm outer diameter tube. 

    Note: colour may vary.

    From: Kegland