1. Large Grain Mash Bag 70cm wide, 40cm deep, polyester with draw string for BIAB
    $10.00

    Large Grain Mash Bag 70cm wide, 40cm deep, polyester with draw string for BIAB

    Large reusable nylon mesh bag measuring 70cm wide, and 40cm deep with a draw string. Ideal for the BIAB / Brew In A Bag brewing method.

    As this product is nylon you should ensure that it is not exposed to direct flame or in contact with the bottom of your mash vessel when heating your mash.
  2. Filter Bag: Large Coarse (Winemaking)
    $21.80

    Filter Bag: Large Coarse (Winemaking)

    Filter Bags: Large Coarse (Winemaking). A coarse mesh nylon bag with a width of approximately 55cm and a height of approximately 60cm. Washable and re-usable. Also available in fine mesh.
  3. Filter - 1 Micron Washable Filter - 1 Micron Washable
    $20.00

    Filter - 1 Micron Washable

    1 Micron Washable Filter to fit 10 inch housing. Indestructible PE reinforced plastic shell to protect your filter from rupturing, or physical damage.

    Most yeast will be filtered out with a 5 micron filter, while even more will be filtered out with a 3 micron filter.
    A 1 micron filter removes most yeast at the High Efficiency rating.
  4. Filter Bag: Large Fine (Winemaking) Filter Bag: Large Fine (Winemaking)
    $24.20

    Filter Bag: Large Fine (Winemaking)

    Filter Bags: Large Fine (Winemaking). A fine mesh nylon bag with a width of approximately 55cm and a height of approximately 60cm. Washable and re-usable. Also available in coarse mesh.
  5. Replacement Screen - Bouncer Mac Daddy
    $27.00

    Replacement Screen - Bouncer Mac Daddy

    Replacement screen assortment for Bouncer Mac Daddy Inline Filter.
  6. Hop Straining Bag 125mm x 220mm
    $3.80

    Hop Straining Bag 125mm x 220mm

    A reusable hop straining bag made from nylon mesh. Good for steeping hops or dry hopping, or for adding other things like oak chips to your brew. It's also easy to clean and sanitise.
  7. Classic Bouncer Filter
    $50.00

    Classic Bouncer Filter

    The Bouncer Inline Beer Filter allows you to brew better tasting and clearer beer, with less waste, and without pumps or additives! Simply connect the filter between your racking cane and keg, or between your boil kettle and fermenter.
  8. Hop Sock Bag / Small Grain Bag 750mm x 150mm Hop Sock Bag / Small Grain Bag 750mm x 150mm
    $5.00

    Hop Sock Bag / Small Grain Bag 750mm x 150mm

    his polyester bags is perfect for small grain additions or for hopping beer. This is a tube of fabric that is 15cm wide and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops (suitable for use up to 110 degrees C).
  9. MKII 65w High Temp Magnetic Pump MKII 65w High Temp Magnetic Pump
    $200.00

    MKII 65w High Temp Magnetic Pump

    Pump - MKII 65watt High Temp Magnetic. Note, this is the larger, 65watt model, ideal for large home brew systems and nano breweries. 

    This pump is constructed of food-grade materials and handles boiling wort with ease. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow without any damage to the pump. Since it is centrifugal, it's not self priming, you must put the pump under the level of the liquid source.

    This is an extremely efficient 0.3amp pump which can be run continuously at elevated temperatures.

    The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.

    Voltage: 220-240 at 50-60hz 
    Power rating: 65w 
    Max Head: 6.5m 
    Max Flow: 52L/min 
    Wiring: Standard 10amp plug
    Fittings: 3/4" BSP

  10. MKII 25W High Temperature Magnetic Drive Pump MKII 25W High Temperature Magnetic Drive Pump
    $119.00

    MKII 25W High Temperature Magnetic Drive Pump

    This pump is constructed of food-grade materials and handles boiling wort with ease. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow without any damage to the pump. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source.

    This is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.

    The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.

    Voltage: 240V-AC
    Power: 25 watts
    Max Head: 3.4m 
    Max Capacity: 19L/min 
    Fittings: 1/2" BSP

    Note: the pump does not include any of the quick connects, camlocks or ball valves shown in the images these are just to show how you can set the pump up to incorporate it into your brewery.