Cleaning Equipment
-
Bottle Brush, Fantail type
Bottle Brush, Standard Small Tip. The length from the handle end to the end of the main part of the brush is 52cms, helpful for getting in to small nooks and crannies. The end is small enough to fit inside most standard bottlenecks.
-
Bottle Brush, Small Tip
Bottle Brush, Small Tip. Just over 45cms in length, with a solid wire construction. There is a further 4cms of bristles shaped like a long paintbrush .The end piece is small enough to fit inside most standard bottle necks. Has a hooked handle allowing you to hang it up when not in use.
-
Nylon Hose Brush - Long - 3/8"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: (3/8") x 66" (167cm)
Made by: Krome Dispense -
Line cleaning keg
These 15 litre cleaning kegs are the easiest way to clean out your beer lines and your keg coupler. Simply fill your washout keg with a mixture of PBW, or similar, and warm water. Attach your coupler like normal, and open your tap. We recommend letting the mixture sit in the lines for a minimum of 5 minutes.
Specifications:
1 x A-Type Spear
1 x D-Type Spear
1 x Corny Keg-style lid with PRV
These 15L cleaning kegs are made from fully passivated stainless steel.
From: Kegland -
Nylon Hose Brush - Long - 3/16"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: 3/16" (3mm) x 66" (167cm)
Made by: Krome Dispense
Nylon Hose Brush - Long - 3/16"
Makes cleaning draft and beverage lines easy with this long handled nylon bristled hose brush.
The importance of properly cleaning beer lines is often understated. In fact, improper line cleaning is likely the single most likely cause for poor quality customer beer. Clean your draft lines with the proper cleaners and equipment regularly for high quality beer.