Cleaning Equipment
-
Nylon Hose Brush - Long - 3/8"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: (3/8") x 66" (167cm)
Made by: Krome Dispense -
Bottle Brush, Small Tip
Bottle Brush, Small Tip. Just over 45cms in length, with a solid wire construction. There is a further 4cms of bristles shaped like a long paintbrush .The end piece is small enough to fit inside most standard bottle necks. Has a hooked handle allowing you to hang it up when not in use.
-
Bottle Brush, Fantail type
Bottle Brush, Standard Small Tip. The length from the handle end to the end of the main part of the brush is 52cms, helpful for getting in to small nooks and crannies. The end is small enough to fit inside most standard bottlenecks.
-
Cleaning Attachment for Keg Coupler
Cleaning Attachment for s-type and d-type couplers. Connect keg coupler to flush beer line. -
Bucket Blaster Keg and Fermenter Washer Kit
Take the work out of cleaning cornelius kegs, carboys and brewing vessels with the bucket blaster.
The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.
-
Master Blaster Bottle Washer
Clean / Sanitise blast your Glass bottles like the master brewer that you are! Can also be used with PET Bottles but you will need a 3/8" Washer or 3/8" Nut as the neck/mouth of PET bottles are much wider than glass. Please see pictures for 3/8" Nut / Washer Placement.
Out of Stock -
Nylon Hose Brush - Long - 3/16"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: 3/16" (3mm) x 66" (167cm)
Made by: Krome Dispense
Nylon Hose Brush - Long - 3/16"
Makes cleaning draft and beverage lines easy with this long handled nylon bristled hose brush.
The importance of properly cleaning beer lines is often understated. In fact, improper line cleaning is likely the single most likely cause for poor quality customer beer. Clean your draft lines with the proper cleaners and equipment regularly for high quality beer.