Mini Kegs
-
$65.00Mini Keg 5L (175mm x 280mm)
This small sized mini keg is conveniently shaped so it will fit into most coolers/eskys. This size will also will fit most standard domestic fridges so it's easy to store without having to buy a new fridge.
The 5L size is equivalent to 15 x 330ml Bottles of beer.
-
$8.00PCO38 Tapping Head (Lid only)
3 x PCO1881 Male Threads to PCO38 Female Thread
The PCO38 keg system is an inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mold processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.This particular tapping head kit is designed to be used in conjunction with a 35psi/2.5bar pressure release valve.
1 x KB10537 - Red PRV 1881 Cap Combo (35psi/2.5bar)
Do not exceed recommended pressure of 35psi.The PCO Kegs come in a range of sizes:
8L PET Keg
4L PET Keg - coming soon -
$19.95PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV
This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 8L PET keg.
The PCO38 keg system is a inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.
This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.
The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (over 100C).
NOTE: The 8L keg shown in the photos is not included.
Out of Stock -
$1.50Replacement Silicone Elbow for PCO38 Tapping Head
This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.
Allowing for a 90 degree connection between the barb on the yellow liquid plastic carbonation cap and the 6.3mm OD dip tube provided in the kit.
-
$2.00Replacement PCO38 Wedge Seal Cap
Replacement lid for PCO38 PET kegs.
Please note: All PCO38 kegs do not have a washer/seal/o-ring. It uses a wedge compression sealing much like a Coca-Cola Bottle does.
-
$164.50Mangrove Jack's 5L Mini Keg Kit
Portable size
Can pressure carbonate (using the ball lock cap)
No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg
Perfect for smaller experimental batches
Handles for easy transportation
Stainless steel body -
$145.00Mangrove Jack's Mini Keg 10L
No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.
- Portable size
- Pressure carbonate (using the ball lock cap)
- Stainless steel body
- Handles for easy transportation
-
$108.00Mangrove Jack's Mini Keg 5L
No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.
-
$62.95Nukatap Mini Flow Control Set
This bundle combines the four items needed for a standard ball lock set up, including a Duotight 8mm Flow Control Ball Lock Disconnect for fine flow rate control.
Includes:
- Nukatap Mini
- NukaTap Mini Self Closing Tap Spring
- NukaTap Mini - Duotight Adaptor - 8mm
- Keg Connector - Duotight Flow Control - 8mm Liquid
-
$29.95NukaTap Mini - Tap Only
Most conventional beer taps are designed with a 10mm diameter nozzle/spout so you can pour pint in just over 10sec. This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications. For compact portable systems, or for home brew draft systems, a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body.
This Nukatap mini is also more ideal for pouring smaller doses. For example cocktails where 150-250ml of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems this tap and FC ball lock disconnect assembly is small enough to literally put in your pocket making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight.
