Fermenter Parts and Accessories

  1. English Barrel Tap. Tapered Thread English Barrel Tap. Tapered Thread
    $6.50

    English Barrel Tap. Tapered Thread

    Complete with swivel head and a tapered thread that is compatible with "English" style fermentation barrels. Available in white only.

    This is not compatible with the standard 30L plastic fermentation buckets available in NZ.
  2. Silicone Stopper for Brew Bucket and FTSs Lid Silicone Stopper for Brew Bucket and FTSs Lid
    $4.95

    Silicone Stopper for Brew Bucket and FTSs Lid

    Silicone Stopper for Ss Brew Buckets and Chronicals, made from food grade silicone.
  3. Senior Airlock
    $4.60

    Senior Airlock

    Senior Airlock - three piece airlock designed to be easy to clean. This unit has a main body, which is used to house a small amount of liquid. There is a floating cap which sits over the hose in the middle of the main body. Finally there is a lid which holds the floating cap in place and creates the bubbling action.

    Has a slightly larger external diameter fitting than the standard Vintage S-shaped airlocks, but is still compatible with standard fermenter grommets and bored bungs.
  4. Ss CIP Spray Ball Tri-Clamp Attachment 1.5" Ss CIP Spray Ball Tri-Clamp Attachment 1.5
    $78.00

    Ss CIP Spray Ball Tri-Clamp Attachment 1.5"

    CIP Spray Ball Tri-Clamp Attachment 

    - Made from 304 Stainless Steel
    - 1.5" tri-clamp cap with 1/2" MPT
    - 2 bar / 29 psi recommended 
    - Use on any 1.5" tri-clamp fitting

  5. White Tap for plastic fermenter
    $5.60

    White Tap for plastic fermenter

    This white or "natural" colour tap has a 3/4" thread which is compatible with the standard thread size in the 30L plastic fermenter buckets and barrels sold in NZ. It is also compatible with the popular "Brew Bottler" product which helps make bottling beers much easier.
  6. Fermentasaurus – rotating racking arm
    $48.00

    Fermentasaurus – rotating racking arm

    Fermentasaurus – rotating racking arm

    This rotating racking arm can be fitted to the Fermentasaurus v1 conical fermenter (or any other fermenting vessel) allowing clear beer to be racked off from the centre of the fermenter. To fit the rotating racking arm you will need to drill a hole into the side of the fermenter; you will also need a 22 mm ring spanner to tighten the nut on the inside of the fermenter.

    Note: this prevents the Fermentasaurus from being used as a pressure vessel.
  7. FastFerment Sampling Port FastFerment Sampling Port
    $18.99

    FastFerment Sampling Port

    FastFerment Sampling Port
  8. FastFerment Thermometer FastFerment Thermometer
    $24.99

    FastFerment Thermometer

    FastFerment Thermometer
  9. Thermowell 100mm Stainless Steel Thermowell 100mm Stainless Steel
    $30.00

    Thermowell 100mm Stainless Steel

    A stainless steel thermowell for temperature probes. Designed for Ss Brew Tech products but the universal weldless design can be used with other fermenters.

    - Brewer's Grade 304 Ss
    - Installs into 17mm punched / drilled hole
    - 6.5 mm inner diameter of tube opening

    Includes one o-ring.

  10. Tap. Italian Barrel & Locknut (med.spigot) Tap. Italian Barrel & Locknut (med.spigot)
    $7.50

    Tap. Italian Barrel & Locknut (med.spigot)

    Tap. Italian Barrel & Locknut (med.spigot). As this tap has a backing locknut and two rubber washers, it is suitable for those looking to mount a tap in any plastic vessel once you have drilled a suitable size hole.