Kegging

  1. 19L Ball Lock Keg – double handle & rubber foot
    $159.95

    19L Ball Lock Keg – double handle & rubber foot

    19L Ball Lock Keg – double handle & rubber foot - new.

    This may be branded as Kegland, Mangrove Jack's or Williams Warn depending on availability.
  2. 9.5L Keg
    $149.95

    9.5L Keg

    A new 9.5 litre keg with ball-lock gas in and beer out posts, and lid with pull-ring pressure relief valve.
  3. Oxebar 20L Amber PET Keg & Pressure Fermenter
    $59.95

    Oxebar 20L Amber PET Keg & Pressure Fermenter

    The Oxebar Mono Barrier Keg by KegLand. Beverages will last 3 x Longer than competitors single PET layer kegs.

    Fit up to 3 of these badboys in your Series X.1, X or 4.1 (aka XL).Or fit up to 6 of these in a Series X.1 Plus!

    Not only will it protect your beer from damaging light (amber tinting) it will also keep your beverages fresher for up to 3 times as long due to the Mono Barrier PET Polymer Matrix.

    It also comes with a floating dip tube with cage filter. Is easy to undo and stack on top of each-other upside down with disconnects attached.

    The 20L Oxebar Amber PET Kegs come with a Green Pressure Relief valve rated to 65psi.

  4. Kegging Starter Kit - Duotight fittings (incl. new 19l keg) Kegging Starter Kit - Duotight fittings (incl. new 19l keg)
    $275.00

    Kegging Starter Kit - Duotight fittings (incl. new 19l keg)

    Fed up of washing bottles? This starter kit will let you keg your beer instead! 

    To use this to carbonate and serve your own beer, you will also need a CO2 gas bottle (various sizes available) OR a sodastream adaptor so you can use sodastream bottles.

    You will need to provide your own beer and a fridge to keep the keg cold!

  5. Kegmenter - 50L - With Ball Lock Cap Kegmenter - 50L - With Ball Lock Cap
    $350.00

    Kegmenter - 50L - With Ball Lock Cap

    These 50L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out.
    Can also be used as a distillation boiler.

    This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.

  6. Kegmenter - 29L - With Ball Lock Cap Kegmenter - 29L - With Ball Lock Cap
    $300.00

    Kegmenter - 29L - With Ball Lock Cap

    These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.

    This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.

    Out of Stock
  7. Parka for 19L Kegs (Super Thick Black)
    $35.00

    Parka for 19L Kegs (Super Thick Black)

    These are high quality and made from thicker neoprene.  You will find that our parkas are signficantly thicker than our competitors making the jackets simply insulate better for longer.

  8. Kegging Starter Kit - barbed fittings (incl. new 19l keg) Kegging Starter Kit - barbed fittings (incl. new 19l keg)
    $290.00

    Kegging Starter Kit - barbed fittings (incl. new 19l keg)

    Fed up of washing bottles? This starter kit will let you keg your beer instead! 

    To use this to carbonate and serve your own beer, you will also need a CO2 gas bottle (various sizes available) OR a sodastream adaptor so you can use sodastream bottles.

    You will need to provide your own beer and a fridge to keep the keg cold!

    Out of Stock
  9. 20L Commercial Stainless Keg 20L Commercial Stainless Keg
    $199.95

    20L Commercial Stainless Keg

    New commercial 20 litre stainless kegs with D-Type spear included and rubber base and handle.

     

  10. PCO38 Tapping Head (Lid only) PCO38 Tapping Head (Lid only)
    $8.00

    PCO38 Tapping Head (Lid only)

    3 x PCO1881 Male Threads to PCO38 Female Thread


    The PCO38 keg system is an inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mold processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

    This particular tapping head kit is designed to be used in conjunction with a 35psi/2.5bar pressure release valve.
    1 x KB10537 - Red PRV 1881 Cap Combo (35psi/2.5bar)
    Do not exceed recommended pressure of 35psi.

    The PCO Kegs come in a range of sizes:
    8L PET Keg
    4L PET Keg - coming soon