1. Duotight push in joiner 8mm x 8mm
    $4.90

    Duotight push in joiner 8mm x 8mm

    Push in joiner 8mm x 8mm
  2. Keg Connector - Beer - Stainless with MFL Keg Connector - Beer - Stainless with MFL
    $20.00

    Keg Connector - Beer - Stainless with MFL

    Stainless Steel beer disconnect with MFL fitting for ball lock corny kegs. Made from 304 grade stainless steel, these keg connectors are extremely reliable and robust.
  3. John Guest 1/4" x 1/4 bsp John Guest 1/4
    $8.00

    John Guest 1/4" x 1/4 bsp

    An adaptor with 1/4bsp thread to a 1/4" tube push-fitting. Suitable for connecting 1/4" tube direct to a regulator outlet.
  4. 5/16" / 8mm John Guest Equal Straight Connector 5/16
    $6.80

    5/16" / 8mm John Guest Equal Straight Connector

    Commercial grade Equal Straight Connector, ideal for joining two 5/16" tubes together.
  5. John Guest 1/4" plug
    $4.00

    John Guest 1/4" plug

    John Guest 1/4" plug
  6. 5/16" John Guest plug 5/16
    $3.00

    5/16" John Guest plug

    A 5/16" John Guest plug, to block a 5/16" connection when it is not in use.
  7. John Guest 5/16" two way divider
    $11.50

    John Guest 5/16" two way divider

    John Guest 5/16" two way divider
  8. 5/16" OD John Guest tube / hose LLDPE (Clear) 5/16
    $1.75

    5/16" OD John Guest tube / hose LLDPE (Clear)

    This is a bulk product - one unit equals 1 meter.

    Commercial grade tubing for beer or gas line. This is stiff material and can be used for push in fittings. It's not easy to handle inside a kegerator or fridge due to being less flexible, therefore we recommend using Ledavin in small spaces.
  9. 1/4" John Guest Equal Tee 1/4
    $12.00

    1/4" John Guest Equal Tee

    Commercial grade Equal Tee fitting, ideal for splitting your gas line to supply more than one keg.
  10. Duotight Flow Stopper - Automatic Keg Filler Duotight Flow Stopper - Automatic Keg Filler
    $19.95

    Duotight Flow Stopper - Automatic Keg Filler

    This really handy device is great for filling kegs, keg to keg transfers or fermenter to keg transfer - great for use with Fermzilla or other pressure fermenters.

    Simply attach this device to the output gas post of your keg then when the keg is full it will prevent further liquid exiting the gas post. This means you can literally set and forget and fill kegs automatically without the risk of kegs overflowing all over the floor. For even better results we recommend this product to be used with the BlowTie Kit.

    This Blowtie Spunding valve will also enable you to apply head pressure to the keg meaning you can control the flow speed but also reduce the foam generated in the filling process, particularly for carbonated beverages like beer.

    This flow stopper includes:

    • 2 x Duotight 8mm x 5/8 push in fittings
    • 1 x ball float
    • 1 x stainless spring
    • 2 x straight 8mm joiners
    • 1 x acrylic sight glass (with 5/8 male thread on either side)
    • 1 x Duotight Elbow 8mm
    • 1 x Duotight 8mm to FFL

    You will also need an MFL Keg Connector (not included) to connect the Flow Stopper to your ball lock keg.