Cider, Seltzer, Mead, Kombucha and Ginger Beer

  1. Temp Twister Cooling/Heating Coil for FermZilla Temp Twister Cooling/Heating Coil for FermZilla
    $64.95

    Temp Twister Cooling/Heating Coil for FermZilla

    The Temp Twister allows you to heat and cool your FermZilla or other fermenter or bright tank, ideally by combining with a glycol chiller.

    This coil can be adapted to fit any fermenter or bright tank that has an opening of 110mm diameter or larger. Simply drill to two 22mm holes in the lid of your fermenter and use the included Duotight bulkhead fittings to attach the coil to the lid of your fermenter.

  2. Standard Bench Capper Standard Bench Capper
    $49.95

    Standard Bench Capper

    Our standard bench capper provides an easy way to cap your beer bottles.

    It is made from steel and with rubber grip pad so your bottles don't slip off the platform

    This bottle capper can be used on different size bottles as the hight of the bell can be adjusted, and it can be bolted to sturdy surface.

    Features:
    - Easy to use and adjust to required heights depending on bottle size
    - Comes with a standard bell which has a built in magnet to hold the bottle cap
    - Simply place bottle caps in the bell then place the bottle underneath and pull the handle down

    The capper is shipped flat-packed and needs assembling before use.

    Out of Stock
  3. 3/16" Shank Tail Piece - Elbow
    $9.95

    3/16" Shank Tail Piece - Elbow

    Stainless steel elbow Tail Piece for your beer shank.

    From: Krome Dispense
    Material: 304 grade stainless steel


    You may also need a hex nut or wing nut, and neoprene washer.

    Out of Stock
  4. 1/4" Shank Tail Piece - Straight 1/4
    $5.00

    1/4" Shank Tail Piece - Straight

    Stainless steel Tail Piece for your beer shank.

    From: Krome Dispense
    Material: 304 grade stainless steel

    You may also need a hex nut or wing nut, and neoprene washer - available separately.
  5. FermZilla - Jacket for 27L FermZilla - Jacket for 27L
    $49.95

    FermZilla - Jacket for 27L

    This jacket is designed to insulate your FermZilla 27L fermenter during the colder months to keep your fermentation at the optimum temperature.

    It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough.

    Completely blocks any light/UV to prevent light-stuck beer.

    Also compatible with 60L All Rounder

    From: Kegland

  6. Sterilock Odour Capsules (4)
    $9.50

    Sterilock Odour Capsules (4)

    For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours. 

    Out of Stock
  7. Sterilock Air Lock (with one odour capsule) Sterilock Air Lock (with one odour capsule)
    $9.50

    Sterilock Air Lock (with one odour capsule)

    The Sterilock contains a patented nanoseal that removes fermentation odours and allows C02 gases to safely vent while preventing any contaminants (including bacteria) to enter the fermentation vessel.

  8. Mad Millie Kombucha Kit Mad Millie Kombucha Kit
    $58.50

    Mad Millie Kombucha Kit

    Make your own Kombucha using our live culture (SCOBY) which turns sweetened tea into a delicious, fizzy beverage. Fermenting kombucha yourself gives you the creative license to have as much or as little tart zing as you want.

    Once activated, your scoby can be reused to brew your own delicious booch time and time again. Your 1 L brew is also the perfect starter culture for bigger fermenting vessels or crocks. It's the gift that keeps on giving!


  9. HS Heat Belt HS Heat Belt
    $35.00

    HS Heat Belt

    For maintaining ideal fermentation temperatures by providing a gentle heat around the outside of your fermenter.

  10. STC-1000 Temperature Controller-Bare STC-1000 Temperature Controller-Bare
    $30.00

    STC-1000 Temperature Controller-Bare

    The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

    The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

    There are lots of easy to follow wiring videos available on Youtube.

    Comes with a 1 meter long temperature probe.

    Model -110V - 220V AC