Cider, Seltzer, Mead, Kombucha and Ginger Beer
-
Floating Dip Tube FILTER For FermZilla or Kegmenter
Floating Dip Tube Filter?80 Mesh 304 Stainless) - For FermZilla or Kegmenter.
Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitised in the full range of cleaners that we sell. The plastic HDPE is over moulded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning.
-
Temp Twister Cooling/Heating Coil for FermZilla
The Temp Twister allows you to heat and cool your FermZilla or other fermenter or bright tank, ideally by combining with a glycol chiller.
This coil can be adapted to fit any fermenter or bright tank that has an opening of 110mm diameter or larger. Simply drill to two 22mm holes in the lid of your fermenter and use the included Duotight bulkhead fittings to attach the coil to the lid of your fermenter.
-
Standard Bench Capper
Our standard bench capper provides an easy way to cap your beer bottles.
It is made from steel and with rubber grip pad so your bottles don't slip off the platform
This bottle capper can be used on different size bottles as the hight of the bell can be adjusted, and it can be bolted to sturdy surface.
Features:
- Easy to use and adjust to required heights depending on bottle size
- Comes with a standard bell which has a built in magnet to hold the bottle cap
- Simply place bottle caps in the bell then place the bottle underneath and pull the handle downThe capper is shipped flat-packed and needs assembling before use.
Out of Stock -
3/16" Shank Tail Piece - Elbow
Stainless steel elbow Tail Piece for your beer shank.
From: Krome Dispense
Material: 304 grade stainless steel
You may also need a hex nut or wing nut, and neoprene washer. -
1/4" Shank Tail Piece - Straight
Stainless steel Tail Piece for your beer shank.
From: Krome Dispense
Material: 304 grade stainless steel
You may also need a hex nut or wing nut, and neoprene washer - available separately. -
FermZilla - Jacket for 27L
This jacket is designed to insulate your FermZilla 27L fermenter during the colder months to keep your fermentation at the optimum temperature.
It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough.
Completely blocks any light/UV to prevent light-stuck beer.
From: Kegland
Out of Stock -
Sterilock Odour Capsules (4)
For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours.
-
-5%
Regular Price: $55.50
Special Price $52.73
Mad Millie Kombucha Kit
Make your own Kombucha using our live culture (SCOBY) which turns sweetened tea into a delicious, fizzy beverage. Fermenting kombucha yourself gives you the creative license to have as much or as little tart zing as you want.
Once activated, your scoby can be reused to brew your own delicious booch time and time again. Your 1 L brew is also the perfect starter culture for bigger fermenting vessels or crocks. It's the gift that keeps on giving!Out of Stock -
Mangrove Jack's Heater Belt 220-240V
Mangrove Jack's Heater Belt 220-240V. (25W) A heater belt is designed to be secured around your fermenter to help keep it at the right temperature during fermentation. It is possible to regulate the heating of the liquid by adjusting the height of the belt around the fermenter.
-
STC-1000 Temperature Controller-Bare
The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.
The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.
There are lots of easy to follow wiring videos available on Youtube.
Comes with a 1 meter long temperature probe.
Model -240V