The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

There are lots of easy to follow wiring videos available on Youtube.

Comes with a 1 meter long temperature probe.

Model -240V

Mangrove Jack's Heater Belt 220-240V. (25W) A heater belt is designed to be secured around your fermenter to help keep it at the right temperature during fermentation. It is possible to regulate the heating of the liquid by adjusting the height of the belt around the fermenter. 

BrewZilla Gen 4 Neoprene Jacket / Parka with Recirculation Arm Cover

New and improved BrewZilla Gen 4 Neoprene Jacket for more stable mash temperatures and heat retention. Now made with 8mm thick neoprene, improved recirculation pipe insulation on both the boiler and the recirculation camlock arm.

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

Available for both 35L and 65L Brewzilla Gen 4 units.

Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time.

The new and improved Generation 2 - 2400 watt Power Controller. Suitable for homebrewers, distillers and any other means of power wattage adjustment up to 2400 watt (standard 10 amp). If you do not know if your electrical device can be reduced in power without failing, contact the manufacturer or an electrician.

This 30w Heating belt will gently warm without creating major hot spots on your fermenter. 
One reason to go belts over pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. With a pad, you're unable to do this, and may potentially cook your yeast turning your hard work into a giant bandaid.

We highly recommend using a belt with a temperature controller for precise temperature control. If you're fermenting in a fridge, you can also use the controller's cooling function as well to control both the belt and the fridge.

This temperature connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely.

This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

Introducing the Ss Glycol Chiller 3/4 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. The chiller is designed to integrate seamlessly with FTSs kits to provide a complete temperature control system.

This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

The Ss Glycol Chiller 1/5 HP will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. The chiller is designed to integrate seamlessly with FTSs kits to provide a complete temperature control system.