This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight. 

Dimensions: 8mm OD x 6mm ID x 50mm long

This elbow piece is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread.  

No clamps necessary!

John Guest 5/16 x 1/4 FFL

Perfect for attaching a MFL fitting or connector to a 8mm "5/16" hose.

Quality fitting by John Guest.

An MFL Check Valve to prevent backflow, with 1/4″ FFL outlet x 1/4″ MFL Inlet.

Use this check valve on ball lock gas connectors with MFL thread. Its internal mechanism prevents accidental back-flow of beer into the gas line on your kegging set up.

Are you ever in a situation where you don't want to unhook your gas line from your kegs, or have ball lock disconnects that you need to clean over at the sink but don't want to take your gas line all the way over there? Well, Kegland thought of a better way. Why not fill a PET Bottle with your cleaner / sanitiser and pump it without gas!

This little device can also be used as a mini party keg without a gas source (should be consumed well within 24 hours of pumping). BYO Liquid disconnect, hose and picnic tap.

Pressure Relief Valve (PRV) fitting for connecting onto a gas post so that you can release pressure while controlling the fill speed when transferring beer from one vessel to another.