Equipment
-
$10.00Beer Tower Base Cover
A polished chrome screw cover for a 3" draft beer tower base.
Material: Stainless Steel 304
Finish: Polished
From: Krome Dispense
External diameter of 115mm and an internal diameter of 75mm. -
$24.95Beer Tap Shank - Column - 44mm
A chrome plated brass column shank 44mm long for your beer tap, with a barbed 6.35mm outlet.
The elbow is made from 304 grade stainless steel that is soldered into the shank.
Out of Stock -
$5.00Beer Tap Handle - European - Plastic
A European-style black plastic handle for beer taps. Fits most faucets.
There are many shapes of tap handles. This is a simple but durable version.
From: Krome Dispense -
$39.95Beer Tap - Standard - Stainless
A quality, standard beer faucet made from 100% stainless steel.
Requires a shank and handle, sold separately. -
$34.95Beer Tap - Standard - Chrome Plated C-201
Chrome plated brass standard dispensing faucet with brass lever.
Requires a shank and handle, sold separately. -
$12.95Push In Pressure Gauge - 8mm
This push in gauge is ideal to read pressures during pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need.
The barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the push in fittings such as the Duotight push in fittings in the 8mm size.
Specifications:
- 0-40psi / 0-250kPa / 0-2.5 Bar (kg/cm^2)
- Rubber Coated
- 8mm Push in Barb
From: Kegland -
$64.955L Propylene Glycol - Kegland
Food grade Propylene Glycol (99%) from Kegland in a handy 5 litre container.
-
$1.00Thermowell and FTSs Chiller Coil - Ss Replacement O-Ring
Ss Replacement O-Ring for SS Brewtech Thermowells and FTSs Chiller Coils.
From: Ss Brewing Technologies, USA
A cheap, small but critical part of your brewkit, don't let a damaged o-ring spoil your brewday. -
$12.9560cm Thermowell - 1/4inch Duotight Bulkhead Included
This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.
-
$9.95Stainless MFL Tap Shank Adaptor
The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.
We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.
Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.
