These long shanks are suitable to attach taps to a Jockey Box (esky) or Fridge/Freezer wall. You will need a 22mm Size Holesaw in order to get a snug fit.

Also Compatible with: Perlick, Brumby, Micromatic + many more.

They come with:
- 100mm Stainless 304 NukaTap Shank 
- duotight 8mm push in to 5/8" female thread
- Flat face external washer
- Flat Internal washer
- Brass Anchor Nut
- Ring collar

A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

Note there is no tail piece included.

A shank made from surgical grade stainless steel which is highly resistant to corrosion. This makes it ideal for wine and kombucha as well as beer. It has a bore size of 6.35mm (1/4").

Available in two sizes with shank lengths of: approx. 79mm, and 130mm

Note there is no tail piece included.

A stainless steel thermowell for temperature probes. Designed for Ss Brew Tech products but the universal weldless design can be used with other fermenters.

- Brewer's Grade 304 Ss
- Installs into 17mm punched / drilled hole
- 6.5 mm inner diameter of tube opening

Available in these sizes:
- 100mm
- 200mm
- 300mm

Includes one o-ring.

This handy tap handle looks great and works with all standard taps. Print the graphics with your desktop printer and you can see your own beer label in the decal holder.

Each new tap handle also comes with a removable, erasable chalkboard surface and if you flip it over you have a whiteboard surface.

This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.

The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock), Bracton (B-Lock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These fittings include the collet and they attach directly to the back of your tap so the tap fits directly into the K-Lok Female x 3/4 Male (Font Adaptor).

The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These are the font adaptors that are designed to fit any fonts with ¾ threaded font such as our Flooded Fonts.

These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.

This upgrade kit will complete the Grainfather Conical Fermenter Pressure Transfer.

Connect your Grainfather Conical Fermenter Pressure Transfer to your CO2 line and corny keg easily with this upgrade kit.

*Note does not include the Grainfather Conical Fermenter Pressure Transfer in photo.