This unit has been designed to fit our standard Quadruple Tap Kegerator Tower or any other 115mm diameter font. It does not fit 1-3 tap kegerator towers.

Keep your beer icy-cold with this insulated tower/font cover right out of the first drop. Most kegerators that we sell include a font fan that blows cold fridge air up the font. With that said heat loss from the stainless font surface causes the font temperature to rise meaning that a small amount of beer contributes to the "first pour foam effect".

These robust stainless steel fonts will last forever and will not corrode like many other chrome plated steel fonts.

The brushed stainless finish looks great and also suits the brushed finished on many kegrators including the Series 4 Kegerator that we sell.

These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.

These fonts are perfect for air cooling and can be used with a Font Fan Kit 

Specifications:
- 320mm Tall (without taps)
- 78mm Diameter
- Base Collar Diameter 111mm
- Internal Foam Insulation

Note: does not include taps

A set of heavy duty, all-stainless caster wheels with brake, designed for harsh brewery wash-down environments. - ideal for use with 64 litre and 1 bbl vessels - 3" (7.62cm) wheel diameter - 3/8" x 1.5" zinc coated stem - 113kg load rating per caster - includes stainless washer leveling kit The installation Guide can be found here. Note: not suitable for jacketed unitanks 

From: Ss Brewtech

This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!

The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. 

A square design beer tap tower which fit all kinds of interiors in modern bars or at home. Available in triple and four tap models.

- Made of high quality stainless steel for durability and reliability
- 100% stainless steel contact with beer
- SS polished finish unless specified

The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

This unit has been designed to fit standard single, double and triple tap font towers.

Will fit other font designs that are 76mm diameter.