A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.

• 1.5" Tri-Clamp 
• 3/8" Hose barb valve
• 0.5 Micron stainless steel carb stone

Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.

A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.

Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included

The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celcius and Fahrenheit. 

The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.

• Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
• 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
• (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
• 3/8" barbed oxygen inlet with ball valve to control flow
• All 304 stainless construction

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

To keep the Grainfather Glycol Chiller operating at its best, we recommend replacing the glycol/water mixture every 6 months. Enough to completely refill the Glycol Chiller and connect up to 4 Conical Fermenters, this food grade propylene glycol will keep the chiller running at its best, providing you with efficient cooling for your fermenters.

This upgrade kit will complete the Grainfather Conical Fermenter Pressure Transfer.

Connect your Grainfather Conical Fermenter Pressure Transfer to your CO2 line and corny keg easily with this upgrade kit.

*Note does not include the Grainfather Conical Fermenter Pressure Transfer in photo.