Fermenters
-
$21.00Grainfather Fermentation Thermometer
The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation
It provides an accurate reading in both Celcius and Fahrenheit.
-
$169.95Inline Oxygenation Kit
The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.
- Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
- 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
- (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
- 3/8" barbed oxygen inlet with ball valve to control flow
- All 304 stainless construction
-
$49.95FermZilla All Rounder - 30L Jacket
This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.
This jacket also completely blocks any light/UV to prevent light struck or skunked beer.
-
$43.00Closed Transfer Kit - Bucket to Keg
This is a basic closed transfer kit for transferring from a simple bucket fermenter to a keg.
Get you beverage from your plastic bucket to your keg without exposure to oxygen. Keep your beer fresh!
See our video for how this works.
Out of Stock -
$50.00Grainfather Propylene Glycol 3L
To keep the Grainfather Glycol Chiller operating at its best, we recommend replacing the glycol/water mixture every 6 months. Enough to completely refill the Glycol Chiller and connect up to 4 Conical Fermenters, this food grade propylene glycol will keep the chiller running at its best, providing you with efficient cooling for your fermenters.
-
$25.00Grainfather Conical Pressure Transfer - Upgrade connection KIT
This upgrade kit will complete the Grainfather Conical Fermenter Pressure Transfer.
Connect your Grainfather Conical Fermenter Pressure Transfer to your CO2 line and corny keg easily with this upgrade kit.
*Note does not include the Grainfather Conical Fermenter Pressure Transfer in photo.
Out of Stock -
New$9.90 -
$19.95Ball Valve - PCO1881 Dry Hop Device For FermZilla
This really handy stainless adaptor ball valve will enable you to connect two PCO 1881 threads with a valve in between. Each side has an integrated O-ring that will seal on the neck of the PCO1881 Thread. Ideally suited to making a dry hop device for FermZilla.
Out of Stock -
$14.95FTSs Controller Mounting Bracket
A mounting bracket for Ss Brewtech fermenters. Mounts to the vessel's thermowell port for all Chronical fermenters and standard Brite Tanks, or to the tri-clamp bracket for Unitanks and Brewmaster Brite Tanks. - Custom tooled shelf for FTSs controllers - Thermowell Bracket is matte black - Tri-Clamp Bracket is 304 Stainless From: Ss Brewtech -
$15.00FermZilla - All Rounder 30L/60L Base Support Webbing / Strap / Bridle / Carry Tie Down
This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!
The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L.
