Need to set two different CO2 pressures for different beers on tap? Then you'll need two regulators to do it properly. With this MK4 Dual Pressure Regulator you'll be able to screw it into your CO2 bottle and fire away with two different pressures. No need to removing the High Pressure gauge off one regulator, buying an attachment and joining the two together.

See - Single CO2 Regulator - MK4 for the single version of this regulator.

This push in gauge is ideal to read pressures during pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need.

The barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the push in fittings such as the Duotight push in fittings in the 8mm size.

Specifications:
- 0-40psi / 0-250kPa / 0-2.5 Bar (kg/cm^2)
- Rubber Coated
- 8mm Push in Barb

From: Kegland

Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use.

This is a must have product if you own a FermZilla or Fermentasaurus and would like to ferment under pressure. With this you can regulate the pressure & therefore carbonation of your fermenter/beer by adjusting the maximum pressure you want it to contain.

Watch this video on assembly & operation details:

https://www.youtube.com/watch?v=B-sKQJFM6Ak

This easy to use SodaStream Cylinder Filling Adaptor will enable you to fill your own CO2 from your larger bulk cylinder into smaller SodaStream cylinders. An easy and inexpensive way to fill your own Sodastream Cylinders at home at a fraction of the cost of getting the refills from your local store.

See this video for full instructions: https://www.youtube.com/watch?v=MeopdQRJPTA

A stainless steel gauge guard for MK4 regulators (Bump Guard).

Are you like us and bump and push in your kegerator too hard up against the wall with the gas bottle on the back, maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap. If you're like us then you need our tough stainless steel regulator bump, bash, smash and drop (within reason) guard protector. Designed and built by those who are tired of replacing gauge and getting refills for a simple accident.

Unlike most Gauge Guards/Gauge Cages this particular design is made completely from one piece of 304 stainless steel so it won't rust over time.

These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.

The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.

A new 5kg CO2 (Alloy) bottle, supplied full. This bottle holds more CO2 than most in homebrewing. The bigger the bottle, the cheaper the CO2 refill per kg.

We believe this bottle is priced very competitively.

This product has to be shipped as "Dangerous Goods" so please allow a day or two extra for delivery.