If you have any questions, fill out our form to arrange a chat with one of our team to help you on your way.
Kegging
-
$29.95Regulator Gauge Cage - MK4
A stainless steel gauge guard for MK4 regulators (Bump Guard).
Are you like us and bump and push in your kegerator too hard up against the wall with the gas bottle on the back, maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap. If you're like us then you need our tough stainless steel regulator bump, bash, smash and drop (within reason) guard protector. Designed and built by those who are tired of replacing gauge and getting refills for a simple accident.
Unlike most Gauge Guards/Gauge Cages this particular design is made completely from one piece of 304 stainless steel so it won't rust over time.
-
$14.95Diffusion Stone - 0.5 Micron (barb)
A carbonation or aeration diffusion stone. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.
The barb fits 1/4" (6.35mm) ID tubing.
Out of Stock -
$19.00Gas Ball Lock Post with 5/8" Thread for keg coupler
Gas Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect gas post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.
-
$54.95Kegerator Cover - Water Resistant (for Series 4 and X Kegerators)
The Kegarator Cover is an ideal solution for storing your Kegerator outside or exposed to water/dust or dirt. Keep your Kegerator in the best condition you can.
Suitable for all Series 4 and Series X tap configurations.
-
$19.95Hop Tube - Stainless Steel with Chain
This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla. It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Diameter: approx. 66mm Heigh: approx. 300 mm.
-
$18.95Drip Tray - Plastic 30cm
A plastic drip tray for your beer taps with removable grill.
Material: Food Grade Polycarbonate
Colour: Black
Dimensions: approx. 30cm x 16cm
From: Krome DispenseOut of Stock -
$4.95Faucet And Shank Cleaning Brush
Double sided Faucet and shank cleaning brush for maintaining your beer taps and dispensing system. -
$20.00Liquid Ball Lock Post with 5/8 Thread for keg coupler
Liquid Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect liquid post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.
-
$20.00Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.
The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.
Both Gas and Liquid posts available.
From: KeglandOut of Stock -
$5.504mm ID Ledavin PVC tube / hose
This is a bulk product - one unit equals 1 meter.
Clear 4mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).
This is in our opinion the best beer line for home use, where you want the line as short as possible (kegerators, fridge mounted taps etc). It's got great line resistance, has a small diameter and therefore you need a much shorter hose to supply the needed line resistance.
