D-Type Keg Coupler - Full 304 Stainless - with Duotight 5/8" to 8mm push fit fittings.

Includes:
1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
2 x - duotight 5/8" duotight to 8mm push in
1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
1 x - Gas Duck Bill valve (Non-Return Gas)

Keg Coupler - D Type (US Sankey). This is a low profile coupler designed for situations where vertical space is limited.

Includes a pressure relief valve (releases at 55 PSI).

'D and S' Type coupler O-ring (Body O-ring) No.5

Normally purchased in increments of x 2. (body takes 2 o-rings)

Gas shut off probe (Keg Coupler Probe seal o-ring No.4)

Compatible with micromatic and all 'D and S' type keg couplers.

Dimensions 17MM OD X 10MM ID

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

This is an easy and convenient way to split your single gas line into multiple gas lines.

NOTE: This product is not suitable for beer or other beverages. It's gas only.

Premium Plus Micromatic, dual guage CO2 Regulator for your kegging system. This high quality regulator will allow constant pressure supply at high output flow rates. Now comes with adjustment knob to alter the pressure, or use the allen key provided. The two stainless outlets come with shut off valves, and allows you to run two or more kegs at the same pressure.

The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.
Comes with 8mm push in fitting.