PH Indicator Papers (1 - 11)

A sugar refractometer for measuring the density of your beer or wine.

Many brewers prefer to use this instead of a hydrometer because they find it quicker and easier to get an accurate reading. A refractometer will allow you to take instant gravity measurements during mash run-off or during the boil. It works like a hydrometer except you only need a few drops and there is no need to cool a trial jar of liquid before taking a reading.

A glass thermometer that is 295mm long, suitable for measuring temperatures in the range of -10C to 110C. Compatible with the black thermometer bung (sold separately) so it can be mounted in the neck of a glass vessel with a suitable sized neck.

A convenient tool for retrieving a sample of liquid from a carbouy or fermenter. Has a stop valve at the bottom which opens when pushed against the bottom of the vessel, allowing the Sampler to fill with the fermenting liquid. This can then be transferred to another container for testing fermentation progress and/or tasting.

50ml Measuring Cup - measures in 10ml increments

Pipette - 2ml

Perfect for measuring small quantities of liquid product - Like sanitiser, lactic acid or antifoam

TILT Hydrometer

Make brewing easier and more accurate with the Tilt Hydrometer. Check the specific gravity and temperature of your beer while it’s fermenting, without ever having to open your fermenter or pour out any of your precious brew. You can instantly read your brew's specific gravity and temperature on your compatible mobile device. It’s even compatible with the Grainfather App. See TILT Apps for more detail.

Available in red, blue, yellow and green. Please, note that if using multiple Tilt Hydrometers for different batches of beer, you’ll need to use a different colour for each batch. The app will not read multiple hydrometers of the same colour.

Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your mobile device.

The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).

pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH