Wine Making
-
$6.20 -
$18.0026cm Funnel (mesh sold separately)
A general all-purpose plastic funnel with a top diameter of 26cm. The external diameter of the bottom of the funnel is 26mm
Out of Stock -
$3.90 -
$2.503/16" OD hose / tube Ledathane PE Natural
This is a bulk product - one unit equals 1 meter.
3/16" OD Ledathane PE Natural, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings. -
$4.003/4" threaded barrel bung for plastic fermenters / cubes PC4904
3/4" threaded barrel bung for plastic fermenters / cubesOut of Stock -
$3.103/8" OD hose / tube Ledathane PE Natural
This is a bulk product - one unit equals 1 meter.
3/8" Tube Ledathane PE Natural, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings.Out of Stock -
$31.5030cm Plastic Funnel (including mesh filter)
A general all-purpose plastic funnel with a top diameter of 30cm. The external diameter of the bottom of the funnel is 28mm
-
$30.0030w Heating Belt
This 30w Heating belt will gently warm without creating major hot spots on your fermenter.
One reason to go belts over pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. With a pad, you're unable to do this, and may potentially cook your yeast turning your hard work into a giant bandaid.We highly recommend using a belt with a temperature controller for precise temperature control. If you're fermenting in a fridge, you can also use the controller's cooling function as well to control both the belt and the fridge.
Out of Stock -
$12.005/16" John Guest Equal Tee
Commercial grade Equal Tee fitting, ideal for splitting your gas line to supply more than one keg. -
$3.005/16" John Guest plug
A 5/16" John Guest plug, to block a 5/16" connection when it is not in use.Out of Stock
