Equipment
-
$30.0030w Heating Belt
This 30w Heating belt will gently warm without creating major hot spots on your fermenter.
One reason to go belts over pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. With a pad, you're unable to do this, and may potentially cook your yeast turning your hard work into a giant bandaid.We highly recommend using a belt with a temperature controller for precise temperature control. If you're fermenting in a fridge, you can also use the controller's cooling function as well to control both the belt and the fridge.
-
$19.90Poly bulkhead for 6.5mm diameter temperature probe
Poly bulkhead for 6.5mm diameter temperature probe -
$95.00Pen style digital pH meter - 0.01 pH resolution
This professional ph meter is designed to measure and display both pH levels and temperature with very high accuracy. Featuring IP67 - 100% splashproof & dustproof, selectable °C & °F, large display screen, replaceable electrode, 3-point calibration system and comes with free 3 pH Powder (pH4.00, pH6.86 & pH9.18).
It comes with built-in Automatic Temperature Compensation (ATC), you don't have to worry about the effect of temperature change on pH level.
It will simultaneously measure the temperature as well.
You can replace the probe, which is stored in an embedded sponge cap.
Batteries (LR44) included!
Out of Stock -
As low as: $155.00
Home Brewer Water Analysis Report
Get your brewing water tested at a laboratory. The first step to water modifications is to know your brewing water.
If you buy this report, we ship to you the sample containers, pre-paid freight to your closest laboratory (Hamilton, Blenheim or Christchurch), instructions, ice packs and a polystyrene shipping box to keep your sample cold during transport.
Completed test results are emailed back to you once available.
We believe this is currently the only affordable laboratory grade water test aimed at home brewers in New Zealand.
Your sample is being tested for the following parameters:
Calcium
Magnesium
Sodium
Chloride
Sulphate
Total Hardness
Total Alkalinity
pH
The optional add on report uses the data from your laboratory water report to give you tailored advice on how to modify your water for a variety of beer styles.
This is highly recommended unless you know how to interpret & use water analysis data.
You can find an example report here. -
$4.95Plastic Trial Jar - 100ml
100ml plastic trial jar. Ideal for taking hydrometer readings.
Note: these trial jars are slightly shorter than previous batches. They are therefore not suitable for the Alla hydrometers, but fit well for the Keg King ones. -
$3.00pH 7.00 Buffer Solution Powder for pH Meter
pH Buffer powder 7.00 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 4.01 Buffer Solution Powder for pH Meter
pH Buffer powder 4.01 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00pH 10.01 Buffer Solution Powder for pH Meter
pH Buffer powder 10.01 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 9.18 Buffer Solution Powder for pH Meter
pH Buffer powder 9.18 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 6.86 Buffer Solution Powder for pH Meter
pH Buffer powder 6.86 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock
