This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!

The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. 

A set of heavy duty, all-stainless caster wheels with brake, designed for harsh brewery wash-down environments. - ideal for use with 64 litre and 1 bbl vessels - 3" (7.62cm) wheel diameter - 3/8" x 1.5" zinc coated stem - 113kg load rating per caster - includes stainless washer leveling kit The installation Guide can be found here. Note: not suitable for jacketed unitanks 

From: Ss Brewtech

You might be saying to yourself "Ahhh bugger! It was too hot..." and now you're here! Don't worry we have replacement tanks available for purchase. These are all pre-drilled and as clean as whistle.

For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours. 

The Sterilock contains a patented nanoseal that removes fermentation odours and allows C02 gases to safely vent while preventing any contaminants (including bacteria) to enter the fermentation vessel.

Demijohn Solid Bung 28mm-30mm (23L Jar) (28mm to 32mm)

Fits 23l glass carboys and 5L demijohns.

Demijohn Bored Bung 28-30mm - with an airlock hole.

Fits perfectly a 5l (FLIP TOP ONLY) glass demijohn for a tight seal. 
Not compatible with the wide mouth screw top demijohns.

Typically made from rubber or silicon.

Silicon bung with hole for airlock. Tapered - 20mm-35mm. Suitable stopper for most carboys and flasks.

Solid silicon bung that is tapered - 20mm-35mm. Please note that this is a solid bung - no hole for airlock.

Mangrove Jack's Heater Belt 220-240V. (25W) A heater belt is designed to be secured around your fermenter to help keep it at the right temperature during fermentation. It is possible to regulate the heating of the liquid by adjusting the height of the belt around the fermenter. 

The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

There are lots of easy to follow wiring videos available on Youtube.

Comes with a 1 meter long temperature probe.

Model -240V

A Heat Pad to help keep your home brew warm. Also called a heat panel. 


This is a quality, New Zealand made product.

This temperature connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely.