Equipment
-
RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth)
Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).
The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT.
-
RAPT Pill - Red Housing
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing and double o-rings shown in the images
RAPT Pill circuit board sold seperately
-
RAPT Pill - Blue Housing
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing and double o-rings shown in the images
RAPT Pill circuit board sold seperately
-
RAPT Pill - Green Housing
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing and double o-rings shown in the images
RAPT Pill circuit board sold seperately
-
RAPT Pill - Clear Housing (Male Threaded - Bottom Piece)
Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.
RAPT Pill circuit board sold Separately
RAPT Pill O-Ring Set Sold Separately -
Replacement Silicone O-ring for RAPT Pill
Replacement Silicone O-ring for RAPT Pill
It is always wise to have a few spares in case some get pinched when tightening up the RAPT Pill.Please note: The price is for a single O-ring. Each RAPT Pill requires 2 O-rings.
-
Wireless Charging Kit for RAPT Pill Hydrometer
Charge your Pill wirelessly with this easy-to-install upgrade kit from Kegland. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud.
-
Tilt Hydrometer
TILT Hydrometer
Make brewing easier and more accurate with the Tilt Hydrometer. Check the specific gravity and temperature of your beer while it’s fermenting, without ever having to open your fermenter or pour out any of your precious brew. You can instantly read your brew's specific gravity and temperature on your compatible mobile device. It’s even compatible with the Grainfather App. See TILT Apps for more detail.
Available in red, blue, yellow and green. Please, note that if using multiple Tilt Hydrometers for different batches of beer, you’ll need to use a different colour for each batch. The app will not read multiple hydrometers of the same colour.
Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your mobile device.
The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).
-
Buffer Powders - 3 kinds per bag
pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)
In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions.
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.
pH solution is accurate to (-+) 0.01pHOut of Stock