This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of these devices.

By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.

pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

These digital scales are ideal for accurately measuring:
- Hops
- Specialty Malt
- Yeast Starters
- Cleaning Powders
- Disposable Cylinders
- Most items up to 10kg

It is not suitable for weighing under 5g accurately.

A must have bit of kit for any homebrewer. Don't waste time next to the hose, punch in what you need and concern yourself with other parts of the brew day. It is the KegLand way!

The perfect present for any homebrewer of any skill level, we all need water to brew.

Premium quality pH solutions from Hanna Instruments for calibrating your pH meter. 

Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.

Reported values are accurate to +/- 0.01 pH at 25°C.

A stick on, liquid crystal thermometer from Ss Brewtech.

- range: 2-24 degrees Celcius
- adhesive, will stick to side of any fermenter
- great for Brew Buckets and Mini Buckets

Stainless is a great conductor of heat, so adhesive thermometers like this are much more accurate on stainless fermenters than they are on plastic.

From: Ss Brewtech

A general all-purpose plastic jug with a measurement scale up to 250ml. Ideal for measuring small volumes of liquid.

We have many sizes of jug available, but this is the only one that is only big enough for 250ml. Ideal for measuring out clarifying agent and small volumes of sanitiser.

A general all-purpose plastic jug with a measurement scale up to 1 litre. Ideal for measuring volumes of liquid up to 1litre in volume.

We have many sizes of jug available, but this is the only one that is 1 litre in size. Ideal for measuring out volumes of liquid up to 1 litre in volume.

Exact measure every bottle for consistant carbonation of beers, with a built in funnel for each end.

For 375ml and 750ml bottle sizes. Takes the guesswork out of using sugar, the cheaper alternative to carbonation drops.