Jazz up your Kegerator or commercial beverage dispensary with these stylish decal holders.

Decal holder 82mm copper plated plastic

Ensures there are no leaks when using a 5/8" hex nut and an angle or straight barbtail.

The purpose of Neoprene washers is to create a tight fitting seal. The flexibility of rubber means that the bearing surface can be compressed for a tight fit. The neoprene also provides effective protection against corrosion.

Nothing is quite like the quality and robustness of stainless steel. These 304 grade brushed stainless steel fonts are corrosion resistant and look great.

These quality made fonts are also well insulated with a closed cell insulation foam fits the inside of the font snugly preventing unwanted heat ingress into your precious amber beverage. These fonts also will not corrode like the other cheaper chrome plated steel fonts that are common in NZ/Australia.

Specifications:
- 340mm Tall (without taps)
- 78mm Diameter
- Base Collar Diameter 111mm
- Internal Foam Insulation

Note: does not include taps

Faucet / Tap Spout Brush Cap. Compatible with most types of beer taps, this hygiene plug is the convenient option for ensuring fruit flies do not have access to the inside of your beer taps when they are not in use. The brush cap action helps reduce build-up inside the tap spout.

Universal Silicon Faucet Plug

Triple Tap Beer Tower for Kegerator Triple Tap Beer Tower for dispensing your beer from kegs.

A black plastic picnic tap - the quick, economic and easy solution to serve beer from a keg. Commonly used as part of minikeg setups which are great for taking on the road, but also a good option for someone who is looking for the cheapest method of setting up a home kegerator or keezer.

Compatible with most beer line sizes, although we recommend using commercial grade 4mm Ledavin to reduce the required length of beer line to balance your serving system.

The Growler Filler Spout extension can be used on any of the Nukatap beer taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.

Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. Also compatible with Intertap models.

We recommend using silicone hose, available separately.