This is a bulk product - one unit equals 1 meter.

Clear 4mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

This is in our opinion the best beer line for home use, where you want the line as short as possible (kegerators, fridge mounted taps etc). It's got great line resistance, has a small diameter and therefore you need a much shorter hose to supply the needed line resistance.

A plastic drip tray for your beer taps with removable grill.

Material: Food Grade Polycarbonate
Colour: Black
Dimensions: approx. 30cm x 16cm

From: Krome Dispense

This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla. It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel. 

Diameter: approx. 66mm Heigh: approx. 300 mm.

The Kegarator Cover is an ideal solution for storing your Kegerator outside or exposed to water/dust or dirt. Keep your Kegerator in the best condition you can.

Suitable for all Series 4 and Series X tap configurations.

Gas Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect gas post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.

A carbonation or aeration diffusion stone. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.

The barb fits 1/4" (6.35mm) ID tubing.

Liquid Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect liquid post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.

These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.

The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.

Both Gas and Liquid posts available.

From: Kegland

These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.

The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.

Both Gas and Liquid posts available.

From: Kegland