Reduce condensation on the Conical Fermenter caused by low fermentation temperatures. Made from high quality 5mm thick SBR foam.
Contains two separate removable pieces for the fermenter body and the conical cone.

Cooling Connection Kit
This is included with the Glycol Chiller. If you have more than one Conical Fermenter you want to hook up to the Glycol Chiller, you will need an extra Cooling Connection Kit.

This includes:
2 x cooling connection couplers
2 x 2 m hoses

A long Nylon Hose Brush for beer line cleaning on your kegging system.

Size: (3/8") x 66" (167cm)
Made by: Krome Dispense

A replacement Tri Clamp (2 Inch) for the Grainfather Conical Fermenter Cone

Replacement tops for 500ml and 750ml Copper Tun Flip Top Bottles.

Do not wash with strong cleaners. When cleaning, remove seal and sterilise separately. Wash with warm soapy water. Rinse Well. Tops do not fit most other flip top bottles.

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulate and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. The Cooling Pump allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.

Contains:
- Pump
- Couplers to attach to the fermenter
- Two cooling hoses with insulation

The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter Pro and Cooling Pump Kit. This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design. The 60-degree (Golden Angle) cone allows for optimum yeast/sediment drop down, giving you clearer beer.

Bottle Brush, Standard Small Tip. The length from the handle end to the end of the main part of the brush is 52cms, helpful for getting in to small nooks and crannies. The end is small enough to fit inside most standard bottlenecks.

Bottle Brush, Small Tip. Just over 45cms in length, with a solid wire construction. There is a further 4cms of bristles shaped like a long paintbrush .The end piece is small enough to fit inside most standard bottle necks. Has a hooked handle allowing you to hang it up when not in use.

These heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermzillas and those brew pots.

Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment. They are 55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.

Ferment like never before! The Grainfather Conical Fermenter gives the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised.

Get professional results at home with the ultimate fermentation package!

The GF30 Advanced Cooling Setup includes, the GF30 Conical Fermenter, which gives you a superior fermentation environment to achieve expert brewing results with every beer and the flexibility to control/monitor fermentation from anywhere thanks to built-in wireless control.

Plus, with the addition of the GC4 Glycol Chiller, you’ll have optimum temperature control to help you produce quality craft beers and you’ll even be able to cold crash and lager down to 4-6°C (39-43°F).