Equipment
-
$59.50Bottle Rinser / Sanitiser
Bottle Rinser designed to make the chore of cleaning and sanitising bottles easier.
Put cleaner or sanitiser in the main chamber, and then when you push a bottle down on the spout it sprays a jet of liquid up inside the bottle. Manual action - no power required.Compatible with both bottle trees we stock.
-
$94.50Bottle Tree - 81 bottles
Bottle Tree - fits 81 bottles. Perfect for draining & drying your home brew bottles upside down. Made from red plastic with a stable black single foot. Will make your life so much easier on bottling day!
-
$269.00Mangrove Jack's 25L Stainless Steel Fermenter
25L capacity fermenter, high grade #304, scratch resistant, stainless steel body, handles for easy lifting of the fermenter, seamless inside finish for easy, cleaning to prevent contamination, litre measurement stamped on inside, body of fermenter.
-
$45.7011.5 Litre Plastic Carboy
11.5 Litre Plastic Carboy - These are great to use for wine and beer making but are also good storage containers for spirits. Made from food grade PET which is clear as glass so you can watch the fermentation. -
$7.50Mangrove Jacks Carbonation Drops 200gm
Mangrove Jacks Carbonation Drops 200gm. For fast, easy bottling. Carbonation Drops take the guess work out of priming your beer & completely replaces priming sugar.
Each packet contains 60 carbonation drops, enough for 60 x 375ml bottles or 30 x 750ml bottles. -
$6.90Brew Bottler
The Brew Bottler is designed to make bottling your beer or cider as easy as possible. It fits snugly up inside the fermenter tap, as supplied with our 30L Fermenter Bucket or sold separately as White Tap. You can then open up the tap and liquid fills insider the Brew Bottler. When you lift your bottle up around the Brew Bottler, this releases the valve at the bottom and allows the bottle to fill.
We recommend filling the bottle right to the top of the bottle. When you remove the Brew Bottler, this leaves the right amount of head space in the top of your bottle for ideal carbonation conditions.
-
$1.50 -
$49.00HS 30L Wide Mouth Fermenter (Barrel Shaped)
30 litre plastic fermenter with wide, screw lid for easy cleaning. The 30L volume is perfect for fermenting wine, beer, cider, or other fermentation
Please note that this does not include an airlock, airlock grommet, tap or stick on thermometer which must be purchased separately. -
$99.00HS 60L Wide Mouth Fermenter (barrel shaped)
60 litre plastic fermenter with wide, screw lid for easy cleaning. The large, 60L volume is perfect for double batches of wine, beer, cider, or any large scale fermentation. tion.
Dimensions 690mm x 380mm
Mouth opening 225mm wide.
Made from High-Density Polyethylene.
-
$3.90 -
$46.40HS 30L Fermenter Bucket with Lid and Components Pack
The obvious choice for beginner brewers, the standard 30L fermenter bucket is economical and easy to clean. Can be used for many batches as long as you avoid scratching the inside surface, which would make it very hard to sanitise.
We still regularly use these fermenters as a first choice.Kit contains:
- HS 30 L Fermenter and Lid
- Thermometer Strip
- Bubbler Airlock
- Top Hat Grommet
- Sediment Reducer
- Tap
-
$80.0023 Litre Plastic Carboy
23 Litre Plastic Carboy - These are great to use for wine and beer making but are also good storage containers for spirits. Made from food grade PET which is clear as glass so you can watch the fermentation. -
$995.00Kegerator - Series X - Double Tap
The Series X Double Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Nukataps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.
-
$1,045.00Kegerator - Series X - Triple Tap
The Series X Triple Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Nukataps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.
-
$1,095.00Kegerator - Series X - Quadruple Tap
The Series X Quadruple Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Nukataps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.
-
$995.00Kegerator - Series X - Single Tap - D type (commercial) keg type
The Series X Single Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Stainless taps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.
Note: this D-type kegerator is for the use of commercial kegs.
Out of Stock -
$95.00Mangrove Jack's Kegerator Replacement Digital Control Board
Mangrove Jack's Kegerator Replacement Digital Control BoardOut of Stock -
$45.00Kegmenter Gravity Kit
Includes:
1 x Airlock
1 x 4 inch Flat Plate with hole
1 x Bung (Bored)
1 x Beaded Silcone Seal
1 x 4 inch Tri-Clover Clamp -
$19.95FermZilla - Handle
A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.
The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.
These handles are suitable to take load up to 100kg.
-
$44.95Temp Twister Pump Kit with Return Line and Clamp
If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.
-
$995.00Ss Chronical Stainless Fermenter - Brewmaster Edition - 26 Litre, 52 Litre and 64 Litre
If this product is out of stock stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.
The Ss Chronical Brewmaster Edition Stainless Fermenter - available in 26 litre, 52 litre and 64 litre.
Out of Stock -
$94.95Lid for Chronicals and Brew Buckets - 3" Tri-Clamp - 26 Litre, 52 Litre and 64 Litre
A new lid for Ss Brew Tech Brew Buckets and Chronicals, featuring a 3" Tri-Clamp flange.
- 304 Stainless Steel construction
- For Chronical fermenters and Brew Buckets
- 3" tri-clamp flange Works with 3" tri-clamp accessories such as CIP Spray Ball and blow-off canes.Note: 3" tri-clamp gasket and clamp not included.
Out of Stock -
$55.00Series 4 & Series X - Replacement Air Circulation Fan (120mm x 120mm x 25mm)
This is a quiet and reliable fan used on many high performance electrical devices. Can be used as a replacement air circulation fan for Series 4 and Series X kegerators. The ADDA brand has been renowned for their brushless technology and service free performance.
Out of Stock -
$64.95Heavy Duty Castor Wheel Upgrade for Series 4 or Series X Kegerators
Heavy duty 100mm diameter castor wheels for your Series 4 or Series X kegerator. Each wheel has a polyurethane tread and steel bearings, and they are rated at 100kg per wheel. Includes 2x locking wheels and 2x non-locking.
NOTE: The wheels with the brake need to be on the non-hinged door side as the door hinge interferes with the brake mechanism.
-
From: $1,245.00
To: $1,584.90
Kegerator - Series X Plus
The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two tap towers and is energy efficient & quiet to run.
Configurations are available for up to four taps on each of the two towers.
The Series X Plus is a stress-free, push-in and play Kegerator much like its smaller brother the Series X. If you're looking for simplicity and elegance of a Kegerator that you can expand into, this is the Kegerator for you.
Includes everything you need, except taps which must be purchased separately.
Out of Stock
If this product is out of stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.