Equipment
-
Leg Extensions for Ss Chronical 52L and 64L Fermenters
Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.
- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total lengthSold as a set of four.
Out of Stock -
Blow Off Barb For FTSs and Ss Brew Bucket Lids
Blow Off Barb For FTSs and Ss Brew Bucket Lids.
- Custom tooled specifically for FTSs/Brew Bucket lids
- Fits into blow off / airlock hole
- 1/2" hose barb
- 304 Stainless construction
- Includes 1 spare o-ring (1 o-ring for use / 1 spare) -
NukaTap Mini & NukaTap FC Gen2 - Self Closing Tap Spring
This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap Flow Control (FC) tap. This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should.
Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor.
-
Nukatap - Flow Control - Stainless Forward Sealing Tap
The Nukatap FC (Flow Control) model is latest technology in flow control tap design giving you all the advantages of a forward sealing tap however still allowing you to control the flow speed using a simple flow control leaver on the right hand side of the tap. This makes balancing your beer lines a snap. This type of tap is typically suited to customers who are often switching from one beer style to the next and want maximum flexibility in their draft system. The Nukatap FC is also the first forward sealing tap ever manufactured that can be used with a spring return. Historically on older tap designs such as the Intertap the FC it was not possible to make the self closing spring design work. The new patented Nukatap FC design also includes this highly desirable feature.
-
NUKATAP duotight SS Short Shank - (duotight compatible) KL01137
KegLand is proud to introduce the much awaited duotight compatible Short Shank in Stainless Steel. Now the dreaded heating of hoses and stretching them over a barb and clamping them without a proper stepless clamp tool is a thing of the past. A complete push in Kegerator set up could be yours, or a custom jockey box font set up. Or upgrade the barbed short shanks you have now with our EVABarrier Double Walled hose with duotight by your side.
-
Beer Tap Shank - Stainless with 3/16" Bore
A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").
Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm
Note there is no tail piece included.
-
Beer Tap Shank (C291) - Stainless with 3/16" Bore - 130mm
Beer Tap Shank - Stainless with 3/16" Bore - 130mm -
Beer Tap Shank - Stainless with 1/4" Bore
A shank made from surgical grade stainless steel which is highly resistant to corrosion. This makes it ideal for wine and kombucha as well as beer. It has a bore size of 6.35mm (1/4").
Available in two sizes with shank lengths of: approx. 79mm, and 130mm
Note there is no tail piece included.
-
Inline Oxygenation Kit
The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.
- Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
- 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
- (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
- 3/8" barbed oxygen inlet with ball valve to control flow
- All 304 stainless construction
-
FermZilla All Rounder - 30L Jacket
This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.
This jacket also completely blocks any light/UV to prevent light struck or skunked beer.
Out of Stock