This handy little device enables you to add clarifier / finings to your beer that is in a pressurised fermenter. You can add your claifier / finings to your beer with no exposure to oxygen whilst still under pressure.

Yay, finally a wider mouth demijohn that will take our easy siphons!

You can get the Stopper without Hole or the Stopper with Hole to fit this demijohn.

Please note these demijohns come with a screw top lid rather than a swing top. The swing tops are not compatible with this demijohn.

Neck internal diameter 40mm

Buy a carton of 4 and save 10%

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.

Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong

If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.

Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters but also as an inline carbonation/oxygenation accessory.

This is an upgrade kit for existing FermZilla Tri-Conical and All Rounder fermenters. Only compatible with the 2" Tri-Clamp Adapted Pressure Lid.

Upgrade your FermZilla All Rounder or Tri-Conical fermenter with the new 2 Inch Tri-Clover Lid from Kegland. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid.

This particular lid was designed in order to suit a growing number of customers dry hopping without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel all the oxygen around it and dump freely into the vessel.

If this product is out of stock stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.

Chronical 2.0 is a massive evolutionary leap forward, but it has also stayed true to the product line's core. The full-width lid, a revolution when the original Chronical launched is retained, the pro inspired 60° cone, and bottom dump port is still here. And last but not least, the ever-popular neoprene jacket from the Chronical Brewmaster Edition is standard on Chronical 2.0.  This means that every Chronical 2.0 has a coil and jacket included as standard.

Two sizes available:

• 26 Litre (7 Gal.)
• 64 Litre (17 Gal.)

The unbranded Fermenter Set contains a barrel and accessories, ready to ferment. Includes litre markers down the side.
Use for primary or secondary fermenter, or even as a bottling bucket.

Kit contains:

• Litre markings (etched on outside)
• Bored lid - for the airlock.
• Thermometer strip
• Airlock
• Tap
• Grommet

The Series X Single Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Stainless taps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.