This handy little siphon to bottle kit does exactly that. Siphon directly out of any vessel above the sediment line directly into your bottles. This is a far easier method than moving all of your bottles up to a tap or wand for filling.

Simply start the siphon and use gravity to fill your bottles whist holding the brew bottler, moving from bottle to bottle.

This handy little device enables you to add clarifier / finings to your beer that is in a pressurised fermenter. You can add your claifier / finings to your beer with no exposure to oxygen whilst still under pressure.

Yay, finally a wider mouth demijohn that will take our easy siphons!

You can get the Stopper without Hole or the Stopper with Hole to fit this demijohn.

Please note these demijohns come with a screw top lid rather than a swing top. The swing tops are not compatible with this demijohn.

Neck internal diameter 40mm

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.

Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong

If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.

Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters but also as an inline carbonation/oxygenation accessory.

This is an upgrade kit for existing FermZilla Tri-Conical and All Rounder fermenters. Only compatible with the 2" Tri-Clamp Adapted Pressure Lid.

Upgrade your FermZilla All Rounder or Tri-Conical fermenter with the new 2 Inch Tri-Clover Lid from Kegland. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid.

This particular lid was designed in order to suit a growing number of customers dry hopping without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel all the oxygen around it and dump freely into the vessel.

FermZilla Temp Twister Lid - predrilled and including o-ring.

Take the pain and risk away from drilling your own Temp Twister Ports and Thermowell for your FermZilla. We've done the tricky work for you!