The new FermZilla Gen2 in a whopping 55L, brought to you by the critical key minds and engineers behind the original Gen1, but with all the tweaks that make it the most cost effective conical fermenter to date!

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyones budget. With the FermZilla you have the many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar (35psi).

The FermZilla All Rounder 30L is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank. So like the name says it's the "All Rounder".

If you want to use this product under pressure we would recommend that you use the pressure kit.

A replacement FermZilla lid, made from high quality plastic, chemical resistant and heat resistant. 

This lid will suit any of the FermZilla fermenters, uni tanks, bright tanks. It will suit:

FermZilla 27L - Conical Fermenter
FermZilla 35L - Conical Fermenter
FermZilla 55L - Conical Fermenter
FermZilla 27L - Flat Bottom
FermZilla 55L - Flat Bottom
FermZilla 27L - Bright Tank
FermZilla 55L - Bright Tank

Note: does not include the FermZilla lid ring that holds this down

From: Kegland

Standard 30L fermenter bucket with lid.

Kit contains:

• Litre markings (etched on outside)
• Bored lid - for the airlock.
• Thermometer strip
• Airlock
• Tap
• Grommet

Heavy duty 100mm diameter castor wheels for your Series 4 or Series X kegerator. Each wheel has a polyurethane tread and steel bearings, and they are rated at 100kg per wheel. Includes 2x locking wheels and 2x non-locking.

NOTE: The wheels with the brake need to be on the non-hinged door side as the door hinge interferes with the brake mechanism.

2" Tri-Clamp Sight Glass - Hop Bong with PCO1881 Male Port and black bottle cap.

Capacity in Hop Pellets
150g to 180g

From: Kegland

FermZilla Temp Twister Lid - predrilled and including o-ring.

Take the pain and risk away from drilling your own Temp Twister Ports and Thermowell for your FermZilla. We've done the tricky work for you!

Upgrade your FermZilla All Rounder or Tri-Conical fermenter with the new 2 Inch Tri-Clover Lid from Kegland. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid.

This particular lid was designed in order to suit a growing number of customers dry hopping without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel all the oxygen around it and dump freely into the vessel.

Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters but also as an inline carbonation/oxygenation accessory.

This is an upgrade kit for existing FermZilla Tri-Conical and All Rounder fermenters. Only compatible with the 2" Tri-Clamp Adapted Pressure Lid.