A carbonation or aeration diffusion stone. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.

The barb fits 1/4" (6.35mm) ID tubing.

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap suitable for most kegerator setups.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

This new 5mm ID EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier. Perfect for gas line.

The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. 

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

Swap out your 4mm or 5mm hosing for this smaller internal diameter 3mm hosing coupled with 6.35mm duotight ball lock disconnects (KL24242 and KL24235) for a neat and tidy kegerator, keezer or cellar set up. This sized hosing is perfect for your series X or Series X plus to reduce the bundle of beer line sitting on top of your kegs.

Replacement angled Silicone Pump Tubes for the Grainfather S40 Brewing System.

Does not include clamps.

Silicone hose for liquid transfer. It is resistant to constant high temperatures and will handle temperatures above boiling point, and has excellent chemical resistance. The soft silicon is easy to work with and seals very well.

Please note that this tube should not be used for pressure above 15psi (such as mains water pressure), and has a burst pressure of around 30psi.

For siphoning out of a carboy, demijohn, bucket or FermZilla.  This siphon includes 150cm x 10mm ID silicone tube.

This whole assembly is plasticiser and BPA free.  It will not break like the plastic auto siphons or polycarbonate designs. 

It's made robust out of 304 grade stainless steel and is really easy to take apart for cleaning.  It's more versatile than a conventaional racking cane and easier to start but at the same time similarly simple to use and clean.