Hydrometer jar - one piece alcohol resistant plastic.

The main tube is approximately 25cm tall, and it has a graded scale from 20ml to 210ml in 2ml increments, as well as a fluid ounce scale from 1 to 7 in 1oz increments. The diameter of the base is approximately 8cm.

A brewing hydrometer is a very useful tool for any kind of fermentation. By tracking starting gravity and finishing gravity, you will be able to establish the level of alcohol that has been produced. This is also very helpful when trying to identify if fermentation is complete, which is very important to establish before bottling if you wish to avoid bottle-bombs.

This hydrometer is ideal for wine-making, beer-brewing and cider-making. It includes three scales, allowing you to read specific gravity, potential alcohol, and grams per litre of sugar.

The Specific gravity scale is 0.76 - 1.150.

Stick-on Thermometer strip graded from 10 degrees C to 40 degrees C. Can be stuck to the outside of any fermenter to give an indication of the temperature of the liquid inside.

We find these are quite reliable but it is always a good idea to test the calibration of any thermometer from time to time. For these stick-on versions, we recommend doing this especially as it gets older or if it is exposed to excessive heat such as hot cleaning water.

Alcometer with 0-100% and Proof scales, with instructions. It is not recommended for testing beer, wine or liqueurs as it is most reliable when measuring the alcohol content of liquids with a higher percentage alcohol.

Calibrated to 20 degrees C.

Poly bulkhead for 6.5mm diameter temperature probe

Syringe, Extension Tube 100mm

Syringe, plastic 10ml

One side measures 7ml and the other side measures 9ml. Made in New Zealand.

Reads 0 -100

Contains no mercury

For use with the Euro 5 and MK5E stills