Syringe, plastic 10ml

Syringe, Extension Tube 100mm

This professional ph meter is designed to measure and display both pH levels and temperature with very high accuracy. Featuring IP67 - 100% splashproof & dustproof, selectable °C & °F, large display screen, replaceable electrode, 3-point calibration system and comes with free 3 pH Powder (pH4.00, pH6.86 & pH9.18).

It comes with built-in Automatic Temperature Compensation (ATC), you don't have to worry about the effect of temperature change on pH level.

 

Poly bulkhead for 6.5mm diameter temperature probe

Alcometer with 0-100% and Proof scales, with instructions. It is not recommended for testing beer, wine or liqueurs as it is most reliable when measuring the alcohol content of liquids with a higher percentage alcohol.

Calibrated to 20 degrees C.

A brewing hydrometer is a very useful tool for any kind of fermentation. By tracking starting gravity and finishing gravity, you will be able to establish the level of alcohol that has been produced. This is also very helpful when trying to identify if fermentation is complete, which is very important to establish before bottling if you wish to avoid bottle-bombs.

This hydrometer is ideal for wine-making, beer-brewing and cider-making. It includes three scales, allowing you to read specific gravity, potential alcohol, and grams per litre of sugar.

The Specific gravity scale is 0.76 - 1.150.

Hydrometer jar - one piece alcohol resistant plastic.

The main tube is approximately 25cm tall, and it has a graded scale from 20ml to 210ml in 2ml increments, as well as a fluid ounce scale from 1 to 7 in 1oz increments. The diameter of the base is approximately 8cm.

Glass trial jar - 100ml. Suitable for hydrometer readings.

Has a graded scale allowing you to measure volumes of liquid from 10ml to 100ml in 1ml increments. The main tube is approximately 21.8cm deep, and it has a lipped edge to assist with pouring liquids out. Diameter of the base is approximately 5.5cm.

Plastic trial jar - two-piece for easy cleaning. Suitable for hydrometer readings.

Once assembled, the main tube is approximately 26.5cms in length. The red base is over 9cms in diameter which makes it more stable than other trial jars with a smaller base.