Measuring

  1. Plastic Jug - 3L Plastic Jug - 3L
    $16.30

    Plastic Jug - 3L

    Sometimes a 1L jug is too small and a 5L jug is too big. For these occasions, often a 3L jug is just what you need. This one comes with a sturdy handle and a graded scale on the side so you can use it to measure out smaller quantities too.
  2. Plastic Jug - 5L
    $19.80

    Plastic Jug - 5L

    No home brewery is complete without a durable 5L jug. This is the only size jug we stock which holds 5L. It has a sturdy handle and has a graded scale on the side to allow you to measure out different volumes of liquid.
  3. PH Indicator Papers (1 - 11) PH Indicator Papers (1 - 11)
    $4.67

    PH Indicator Papers (1 - 11)

    PH Indicator Papers (1 - 11)
  4. Alcometer Alcometer
    $17.00

    Alcometer

    Alcometer with 0-100% and Proof scales, with instructions. It is not recommended for testing beer, wine or liqueurs as it is most reliable when measuring the alcohol content of liquids with a higher percentage alcohol.

    Calibrated to 20 degrees C.
  5. Dial thermometer with 42mm probe and weldless Kit
    $39.95

    Dial thermometer with 42mm probe and weldless Kit

    A bi-metal weldless thermometer with 3" stainless steel housing, hermetically sealed in a water proof case with glass face. Ideal for fitting to your mash tun, hot liquor tank or kettle. Provides temperature readout in both Fahrenheit and Celsius. The thermometer kit include 1 x stainless washer, 1 x 1/2"NPT/BSP Lock Nut, 2 x Silicone O-rings. Requires a 7/8" drill bit to install. To prevent leaking, wrap the 1/2" BSP threads with Teflon tape prior to threading into the port.
  6. Wine Thief. Plastic 'The Sampler' Wine Thief. Plastic 'The Sampler'
    $15.20

    Wine Thief. Plastic 'The Sampler'

    A convenient tool for retrieving a sample of liquid from a carbouy or fermenter. Has a stop valve at the bottom which opens when pushed against the bottom of the vessel, allowing the Sampler to fill with the fermenting liquid. This can then be transferred to another container for testing fermentation progress and/or tasting.
  7. Glass thermometer 295mm -10C to 110C Glass thermometer 295mm -10C to 110C
    $16.10

    Glass thermometer 295mm -10C to 110C

    A glass thermometer that is 295mm long, suitable for measuring temperatures in the range of -10C to 110C. Compatible with the black thermometer bung (sold separately) so it can be mounted in the neck of a glass vessel with a suitable sized neck.
  8. Portable Refractometer ATC (Three Scale) Brix - SG Sugar - SG Wort Portable Refractometer ATC (Three Scale) Brix - SG Sugar - SG Wort
    $39.95

    Portable Refractometer ATC (Three Scale) Brix - SG Sugar - SG Wort

    A sugar refractometer for measuring the density of your beer or wine.

    Many brewers prefer to use this instead of a hydrometer because they find it quicker and easier to get an accurate reading. A refractometer will allow you to take instant gravity measurements during mash run-off or during the boil. It works like a hydrometer except you only need a few drops and there is no need to cool a trial jar of liquid before taking a reading.

    Using a refractometer lets you check the progress of your brew so you can make adjustments along the way. A valuable tool for all-grain and extract brewers.

  9. Milwaukee Electrode Cleaning Solution Sachet
    $2.30

    Milwaukee Electrode Cleaning Solution Sachet

    Electrode cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes.  To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe.  Use to help extend the life of the meter's electrode. 

    Electrode cleaning solution should not be a substitute for rinse and or storage solutions. 

    Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. 

    Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode.

    Out of Stock
  10. Milwaukee pH 7.01 Calibration Solution Sachet
    $2.30

    Milwaukee pH 7.01 Calibration Solution Sachet

    Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.

    A lab grade pH 7.01 calibration solution certified to meet the standard with an accuracy of ±0.01 pH removing the inaccuracies involved with mixing solutions from powder.

    Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. 

    Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.

    Out of Stock