12L Fermenter Bucket - ideal for small batches.

*Note the lid has no hole and will need to be drilled to fit a airlock and grommet.

Stainless steel pressure for your FermZilla 27L, 55L and All rounder fermenters.

This extremely inexpensive upgrade will truly show you what the FermZilla was designed for. Read the long description for some possibilities.

Key Features:

• Ferment beer under pressure to reduce ester and fusel alcohol production
• Ability to always draw clear beer with the unique, floating draw tube
• Keg already carbonated beer 
• Use co2 to push beer into a keg or though a filter into a keg
• Carbonate and serve beer directly from the FermZilla, eliminating kegging all together

The new FermZilla Gen2 in a whopping 55L, brought to you by the critical key minds and engineers behind the original Gen1, but with all the tweaks that make it the most cost effective conical fermenter to date!

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyones budget. With the FermZilla you have the many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar (35psi).

The Ss Brew Bucket - a quality fermenter made from brewer's grade 304 stainless steel, and includes an integrated racking arm / ball valve assembly, stackable design, and conical bottom. This is the 26 litre model.

The Brew Bucket's conical bottom allows trub to settle out nicely in a more concentrated space and has the effect of minimising the surface area of your beer that is contact with the trub during ferment, which helps to minimise "off" flavours in your beer.

The FermZilla All Rounder 30L is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank. So like the name says it's the "All Rounder".

If you want to use this product under pressure we would recommend that you use the pressure kit.

A replacement FermZilla lid, made from high quality plastic, chemical resistant and heat resistant. 

This lid will suit any of the FermZilla fermenters, uni tanks, bright tanks. It will suit:

FermZilla 27L - Conical Fermenter
FermZilla 35L - Conical Fermenter
FermZilla 55L - Conical Fermenter
FermZilla 27L - Flat Bottom
FermZilla 55L - Flat Bottom
FermZilla 27L - Bright Tank
FermZilla 55L - Bright Tank

Note: does not include the FermZilla lid ring that holds this down

From: Kegland

The FermZilla All Rounder 60L is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank. So like the name says it's the "All Rounder".

If you want to use this product under pressure we would recommend that you use the pressure kit.

This replacement Gate Gasket is compatible with: 

FermZilla 27L - Conical Fermenter

FermZilla 35L - Conical Fermenter

FermZilla 55L - Conical Fermenter

These 50L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out.
Can also be used as a distillation boiler.

This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.