A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.

Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included

A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.

• 1.5" Tri-Clamp 
• 3/8" Hose barb valve
• 0.5 Micron stainless steel carb stone

Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.

Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.

- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total length

Sold as a set of four.

Blow Off Barb For FTSs and Ss Brew Bucket Lids.

- Custom tooled specifically for FTSs/Brew Bucket lids
- Fits into blow off / airlock hole
- 1/2" hose barb
- 304 Stainless construction
- Includes 1 spare o-ring (1 o-ring for use / 1 spare)

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

This is a basic closed transfer kit for transferring from a simple bucket fermenter to a keg.

Get you beverage from your plastic bucket to your keg without exposure to oxygen. Keep your beer fresh!

See our video for how this works. 

2" Tri-Clamp Sight Glass - Hop Bong with PCO1881 Male Port and black bottle cap.

Capacity in Hop Pellets
150g to 180g

From: Kegland

This upgrade kit will complete the Grainfather Conical Fermenter Pressure Transfer.

Connect your Grainfather Conical Fermenter Pressure Transfer to your CO2 line and corny keg easily with this upgrade kit.

*Note does not include the Grainfather Conical Fermenter Pressure Transfer in photo.

To keep the Grainfather Glycol Chiller operating at its best, we recommend replacing the glycol/water mixture every 6 months. Enough to completely refill the Glycol Chiller and connect up to 4 Conical Fermenters, this food grade propylene glycol will keep the chiller running at its best, providing you with efficient cooling for your fermenters.